Small Block MOPAR 340-408ci Street Heat Short Block
$1,595.00
Your Centroid 4-Axis Machined MOPAR 340 Block • CNC Bored • Square Decked 45° From Crank • Plate Honed up to 4.060″ • Align Honed • Brass Freeze Plugs & New Cam Bearings Installed • Hot Washed • Assembled w/Rotator Listed Below (4.030 bore x 3.500 stroke = 357ci)
AE-MOPAR 3.331″ Stock Reconditioned Crank Ext/Bal • AE-MOPAR 6.123″ I Beam Recondition Rods • Either 8:1 Dish or 10:1 Compression Flat Top Cast Aluminum Pistons • Moly Rings • King Main & Rod Bearings • Rear Main Seal
Upgrades & Options
Centroid CNC Brand New Stock Hi-Performance MOPAR 2 Bolt Main Cap Block (when available)
+ $895.00
Centroid CNC Race Prepped MOPAR Block with New main Cap Girdle & 190,000 PSI Bolts
+ $395.00
MOPAR #P5007552AB Non Siamese Race Block good for 4.080″ Over Bore
+ $2495.00
MOPAR #P5153478AB Siamese Race Block good for 4.180″ Over Bore
+ $2595.00
New Nodular Cast Steel 3.331″ Stroke Crank
+ $395.00
New Nodular Cast Steel 4.000″ Stroke Crank-Radial Clearance & Special Pistons
+ $1095.00
New Pro Street 4340 Steel 4.000″ Stroke Scat Crank-Radial Clearance & Special Pistons
+ $1595.00
New Pro Street Heat 408ci 4340 Steel 4.000″ Package (crank, rods, pistons, machine work)
+ $1995.00
New Pro Street Heat 400ci 4340 Steel 4.000″ Package (new block, crank, rods, pistons, machine work)
+ $3995.00
New Pro Street Heat 434ci 4340 Steel 4.000″ Package (new block, crank, rods, pistons, machine work)
+ $4195.00
Wiseco Pro True 2618 Forged Racing Pistons & Hastings Hi-Performance Ring Set
+ $495.00
Scat 6.123″ I-Beam Rods w/ARP Bolts
+ $195.00
Scat 6.123″ H-Beam 4340 Rods w/ARP Bolts
+ $295.00
Camshaft Kit Below
+ $375.00
Deluxe Short Block Kit Below
+ $675.00
Cometic or Fel Pro MLS Head Gaskets
+ $195.00
ARP Head Bolt or Head Stud Kit Used For Plate Honing the Block For Your Heads (from)
+ $95.00
Cam Shaft Kit
- AE/ Comp Cams Up To .480″ Lift Hyd Camshaft (or your choice!)
- Heavy Duty True Double Roller Timing Set
- Camshaft Fastener Kit Buttoned Up
- 16-Hyd Flat Tappet Lifters
- Degree Camshaft to Proper Specifications
- Hydraulic Roller Camshaft & Lifter Upgrade (add $795.00)
Deluxe Short Block Kit
- Above Cam Shaft Kit Installed Properly (or your choice!)
- Solid Polished Aluminum Timing Cover Kit Installed
- AE Billet Adjustable Timing Pointer TDC Verified
- 6¼” Steel Light Weight Damper TDC Verified
- M83HV Oil Pump Kit & Proper Pick Up
- Moroso 6qt. Oil Pan
- All Gaskets to Finish
- SFI Damper-Balancer (add $175)
- Hydraulic Roller Camshaft & Lifter Upgrade (add $795.00)