347ci SBF 400Hp Steet Heat Crate Engine
Actual engine may vary from pictures

347ci 400Hp SBF Street Heat Crate Engine



  • Fully CNC Machined Ford 2 Bolt Main Block
  • Brass Life Time Freeze Plug Kit Installed
  • Scat 3.400″ Externally Balanced 9000 Series Crank
  • Scat 5.400″ I-Beam Steel Rods and ARP Bolts
  • King Performance Main and Rod Bearing Set
  • JE, Mahle or Wiseco Forged Pistons 10:1
  • Total Seal File to Fit Plasma Moly Ring Set
  • Comp Cams Magnum 280/480 Hydraulic Cam
  • Heavy Duty Double Roller Timing Set
  • TCF302s New Aluminum Timing Cover (stock Ford)
  • TDC Verified Top Dead Center Pointer
  • Hydraulic Flat Tappet Lifters
  • 50oz. Externally Balanced Flex Plate and Harmonic Damper
  • MFR 195cc Aluminum Heads; Amazingly Good Head (not procomp)
  • 2.020/1.600″ Stainless Steel Hi-Performance Valves
  • Comp Cams Hydraulic Roller Valve Spring and Retainer Kit
  • Complete Hi-Performance Racing Gasket Set
  • Manley Chrome Moly5/16 Push Rods
  • Comp Cams HE 1.6 Ratio Aluminum Roller Rockers
  • AwesomeEngines® Chrome Valve Covers w/Push in Large Breathers
  • M63 Oil Pump with Proper Pickup Assembly
  • Stock Chassis 5qt Oil Pan for Any Application
  • Professional Series Air Gap Aluminum Dual Plane Intake Manifold
  • Holley Avenger 670 cfm 4150 Carburetor
  • MSD Ready to Run Distributor, Spark Plug Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

369ci SBF Dart #31364275 SHP Splayed Cap 4.155″ Bore Race Block Fully CNC Race Prepped on Our Centroid 4 Axis CNC Machine
+ $1795.00
Direction Motion Fully CNC Ported 210cc Aluminum Heads Producing Another 40HP
+ $ 695.00
Dart Pro 1 Aluminum 195cc Cylinder Heads
+ $ 995.00
Dart Pro 1 210cc Fully CNC Ported Cylinder Heads Producing another 60HP
+ $1995.00
Pro Street Heat 347ci/415 Hp: Comp Cams Hyd Roller Cam Kit, Edelbrock Air Gap Performer RPM Intake, 750cfm Double Pumper and Spacer
+ $ 795.00
Pro Street Heat 369ci/475 Hp: Dart SHP Block, Dart CNC Ported 210cc Heads, Comp Cams Magnum Hyd Roller Cam, Victor Series Intake, 850cfm Carburetor
+ $3995.00
K1 4340 Internally Balanced Steel Crank and K1 4340 H-Beam Steel Rods with ARP 2000 Bolts
+ $ 895.00
Comp Cams Hydraulic Roller Cam with Erson Roller Lifter Package for Ultimate Torque and Power
+ $ 495.00
Moroso or Canton 7qt Front or Rear Sump Oil Pan for Your Chassis Application
+ $ 295.00
MSD Billet Fully Adjustable Timing Curve Distributor Dyno Tested and Tuned with Proper Curve Kit and Weights
+ $ 125.00
SFI 164 Tooth Flex-plate and SFI Harmonic Balancer Installed External or Internal for Upgraded 4340 Crank Option
+ $ 195.00
Complete 50-519 ( 650hp )Sniper Complete with 160 Pump Fuel Injection System Installed, Dyno Tested and Tuned (Silver or Gold Color is Available)
+ $975.00

Dyno T&T with 93° Pump Gas • Vacuum Pump Installed • HP Corrected to Sea Level

Free freight applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges if any will be known to you before we ship.

Comments are closed.