364ci SBF 545HP Bracket Race Engine

364ci 540 Hp SBF Bracket Race Engine

$11,999.00

8.2 Deck | 4.125 Bore | 3.4 Stroke | 5.4 Rods | 525 Hp @ 7600 rpm

Components

  • Dart 31364275 SHP 4 Bolt Main Splayed Cap Race Block
  • 12 Point Head Stud Kit Plate Honed with the Block
  • Stainless Steel or Brass Life-time Freeze Plug Kit Installed
  • Eagle or Scat 4340 Internally Balanced Steel Crank
  • Eagle or Scat H Beam 4340 Rods with ARP 8740 7/16 Bolts
  • King “HP” Series Main and Rod Bearings
  • JE or Wiseco 13:1 Forged Pistons
  • Total Seal 1/16-1/16-3/16Plasma Moly Rings
  • Comp Cams .690″ Lift Custom Solid Roller Cam
  • Cloyes Billet True Roller Timing Set
  • New Aluminum Timing Cover with TDC Verified Pointer
  • Comp Cams HIPPO Solid Roller Lifters
  • SFI Approved Steel Damper
  • AFR 1381-76Renegade 195cc Heads 315/235Flow @.650″ Lift
  • AFR 8mm Bead Lock 2.050″/1.600″ Stainless Steel Valves
  • Manley .710″ Lift Springs and 7° Bead Lock Steel Retainers
  • Fel Pro Steel Wire Pre-Flattened Racing Head Gaskets
  • Manley .105″ Wall Chrome Moly Push Rods
  • Comp Cams Ultra Gold 1.6 Roller Rockers
  • AwesomeEngines® CNC Engraved Custom Valve Covers
  • Melling HV Oil Pump and Moroso Pickup (front or rear sump ava)
  • Moroso Stroker 7qt. Drag Racing or Pro Street Oil Pan (f/r sump ava)
  • Edelbrock 4150 Match Ported Victor Intake Manifold
  • Holley or QFT 750 cfm Double Pumper Dyno Tuned Carburetor
  • MSD Distributor, Wires and NGK Racing Spark Plugs
  • Free 48 freight see below

Available Upgrades

Dart 31354275 Iron Eagle Sportsman Steel Billet Splayed Cap Race Block
+ $  695.00
Dart 225cc Pro 1 Fully CNC Ported Cylinder Heads with 2.08/1.60″ Valves .700″ Flow 325/238 or AFR and Brodix CNC Same Price
+ $  995.00
Total Seal Stainless Steel or Hell Fire Severe Duty Power Adder Nitrous, Pro Charger or Turbo Applications
+ $  195.00
Fel Pro MLS #1134 MLS Nitrous, Pro Charger or Turbo Applicable Head Gaskets
+ $  125.00
Tool Steel .180″ Wall NOS Wrist Pins
+ $  195.00
AFR 6207 Stud Girdle System Installed
+ $  135.00
T&D Shaft rocker System Installed with No Need for a Stud Girdle
+ $1295.00
Moroso 3 Vane Complete Vacuum Kit with New Pump Installed Relief Valve
+ $1095.00
Crank Trigger Installed
+ $  275.00
Edelbrock Victor Series Intake Manifold Match Ported to Cylinder Heads
+ $  395.00
SFI 157 or 164 Tooth Flex-plate Internally Balanced in House w/ARP Bolts
+ $ 195.00
Power Master Gear Reduction New Design Heavy Duty Starter
+ $  250.00
ATI SFI Super Dampener Specific Honed to Fit Crank, Internally Balanced in House w/ARP Bolts
+ $ 395.00

Dyno Tested and Tuned with 110 Race Fuel • Vacuum Pump • Crank Trigger • HP Corrected to Sea Level

Free freight applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges if any will be known to you before we ship.

Comments are closed.