400ci 540Hp SBC Pro Street Crate Engine
Pro Street series crate engines are the same engine combination as our very popular Pro Bracket Line-Up. With 10:1 compression instead of 13 or 14:1 and a street friendly cam, we have made these the best 93 octane pump gas engines available. Designed and dyno tested with street driving in mind but can be used in drag racing.
$7,799.00
Components
- Dart 31161211 SHP 4 Bolt Splayed Cap Race Block
- Scat 3.750″ Internally Balanced 4340 Steel Crank
- Scat 6.000″ H-Beam 4340 Steel 3D Rods
- Wiseco PT096HS 10.4:1 Forged 2618 Pistons
- Hasting Plasma Moly Hi-Performance Rings
- “High” Performance Main & Rod Bearings
- MRG Chrome Timing Cover & Kit
- M55Hp Oil Pump with Proper Pickup
- Moroso 20195 Stroker 7qt. Race Oil Pan
- SFI 6¼” Internally Balanced Damper
- HEI Distributor, Wires & NGK Plugs
- Brass or Stainless Steel Freeze Plugs
- Awesome Engines T-Shirt & Dart Cap
- Dart Iron Eagle 230cc #10721143P Steel Heads
- Dart 2.080″ Intake & 1.600″ Exhaust S/Steel Valves
- Dart 1.437 Hyd Roller Springs and 10° Retainers
- Fel-Pro Pre-Flattened Copper Wire Head Gaskets
- ARP Head Bolt Kit
- Comp Cams .600″ Lift Hydraulic Roller Cam
- Morel Hydraulic Roller Lifters
- True Double Roller Timing Set
- Comp Cams Chrome Moly Push Rods
- Comp Cams Gold Series 1.5 Roller Rocker Arms
- Edelbrock Performer RPM Air Gap Intake
- Holley Street Avenger 770cfm Carburetor
- AERC Tall Polished Aluminum Valve Covers
Upgrades and Options
Brodix STS T1 Fully CNC Ported 233cc Full Race Head Package w/Brodix HV1000 & Head Studs
+ $2000.00
Manley H-Beam Rods with ARP 2000 Bolts
+ $200.00
Maxx Pro Street 615Hp Version: S/Roller, 12.2:1 Com, S/Victor, Spacer, 750 CFM, 105+ Fuel Only
+ $1000.00
N2O Package: Total Seal Stainless Steel Rings, Thick Wall Pins & Fel Pro MLS Head Gaskets
+ $400.00
Edelbrock High Volume Long Late Model Aluminum Water Pump
+ $200.00
Serpentine Complete Pulley System for Crank, Water Pump and Alternator Application
+ $200.00
MSD 6AL New Design Programmable Ignition and Blaster II Coil Dyno Tested with Your Engine
+ $400.00
Wiseco Nitrous 12:1 2618 Pistons For 105+ Fuel w/ 6.125″ H Beam Rods Included
+ $200.00
Edelbrock Fuel Pressure Regulator and Twin #6 Line and Fitting Kit with Under the Carb Plate
+ $150.00
Endurashine Applications Available for Intake Manifolds or Custom Coatings Upon Request
+ $1200.00
Mechanical Fuel Pump Complete System with Regulator, Braided Fuel Line, Fuel Filter and Fittings
+ $500.00