406ci 575+Hp SBC Pro Basic Race Engine

406ci 575Hp SBC Pro Basic Race Engine

All brand new parts including a 4340 steel crank internally balanced and steel billet 1000hp H beam rods w/ARP2000 bolts. Full roller valve train dyno tested and tuned ready for carb and your ignition or just get ours.


9.000″ Deck |4.155″ Bore | 3.750″ Stroke | 6.000″ Rods | 575+Hp @ 6800 rpm (E85 Ready)



  • AR-5 Steel Billet Splayed Cap Main 1500Hp Race Block
  • Stainless Steel Life Time Freeze Plug Kit Installed
  • Pro Series 12 Point Head Stud Kit Plate Honed w/Block
  • AR-4340 Internally Balanced Steel Crank
  • AR-I Beam Steel Billet Rods w/ARP Bolts
  • King “HP” Race Series Main and Rod Bearings
  • AR-11.00:1 Forged Flat Top Pistons w/Low Tension Oil Rings
  • 1/16/1/16 3mm File to Fit Plasma Moly Racing Ring Set
  • AwesomeEngines® Comp Cams .630″ Lift Roller Cam
  • Morel Pro Series USA Solid Roller Lifters
  • Cloyes Billet True Roller or Quiet Series Gear Drive (never fails)
  • AwesomeEngines® Aluminum Timing Cover w/Billet TDC
  • AR-SFI Damper Internally Balanced Harmonic Damper
  • AR-Pro/Flow 200cc Fully Race Prepped and Ported Heads
  • 2.050″ Intake and 1.600″ Exhaust Stainless Steel Valves
  • 1.500″ Roller Springs, 10° Retainers and Comp Cams 611-16 Locks
  • Fel Pro #1010 Pre-Flattened Copper Wire Head Gaskets
  • Manley .120″ Wall Chrome Moly Severe Duty Push Rods
  • Comp Cams Ultra Gold New Aluminum Roller Rockers
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • AwesomeEngines®/Melling M55 Oil and Proper Welded Pick Up
  • AwesomeEngines®/Moroso Oil Pan, Windage Tray
  • Professional Products 4150 Victor Style Intake Manifold
  • AR-1000cfm 4150 Carburetor (add $495 E85 add $1150)
  • Billet Distributor, 8.5mm Wires and NGK Spark Plugs (add $255)
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Tool Steel Light Weight Retainers; We have seen as much as 200 rpm more with the tool steel retainers over Titanium and zero wear
+ $ 125.00
Jomar Pro Series Stud Girdle System Installed
+ $ 225.00
T&D Aluminum or Crower Stainless Steel Pro Series Split Ratio 1.6/1.5 Shaft Rockers Installed
+ $1095.00
Fel Pro MLS Severe Duty N2O Head Gaskets
+ $ 95.00
AwesomeEngines® Crank Trigger Set Up Installed and Dyno Tested
+ $ 175.00
Moroso Complete New Vacuum Pump System Installed
+ $ 995.00
ATI Super Damper Installed
+ $ 225.00
Match Port Victor Style Intake Manifold
+ $195.00
Ultra SFI 168 Tooth Flex-Plate Internally Balanced in House w/ARP Bolts
+ $ 125.00
CVR High Torque Gear Reduction Made in the USA New Design Heavy Duty Starter
+ $ 195.00
NX Gemi Nitrous Plate System w/100-500Hp
+ $ 795.00

Dyno T&T w/95° Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Comments are closed.