408ci SBF 475HP Street Heat Crate Engine
Actual engines may vary from pictures

408ci 475+Hp Small Block Ford Street Heat Crate Engine



  • AwesomeEngines® CNC Blue Printed/Recon-Ford 2 Bolt Main Block
  • 12 Point Head Stud Kit Plate Honed w/Block
  • Brass or Stainless Steel Life Time Freeze Plug Kit Installed
  • Scat 4.000″ Externally Balanced 9000 Series Crank
  • Scat 6.000″ I-Beam Steel Rods w/ARP Bolts
  • King Performance Main and Rod Bearing Set
  • JE, Mahle or Wiseco Forged Pistons 10:1
  • Total Seal File to Fit Plasma Moly Ring Set
  • Comp Cams Magnum 280/480 Hydraulic Flat Tappet Cam
  • Heavy Duty Double Roller Timing Set
  • TCF302s New Aluminum Timing Cover (stock Ford)
  • Hydraulic Flat Tappet HP Lifters
  • 28oz. Externally Balanced Flex-plate and Harmonic Damper
  • AwesomeEngines® ProFlow 195cc Aluminum Heads (in house v/job)
  • 2.020/1.600″ Stainless Steel Hi-Performance Valves
  • Comp Cams Hydraulic Springs, 10° Retainers and Locks
  • Complete Hi-Performance Racing Gasket Set
  • Comp Cams Magnum Heavy Duty Push Rods
  • Comp Cams Pro Series 1.6 Ratio Aluminum Roller Rockers
  • Chrome Valve Covers w/Push in Large Breathers
  • M83 Oil Pump with Proper Pickup Assembly
  • Stock Chassis 5qt Oil Pan for Any Application
  • Professional Series Air Gap Aluminum Dual Plane Intake Manifold
  • Holley Avenger 770 cfm 4150 Carburetor
  • MSD Ready to Run Distributor, Spark Plug Wires w/NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

402ci SBF Dart #31365135 SHP Splayed Cap 4.000″ Bore Race Block Fully CNC Race Prepped on Our Centroid 4 Axis CNC Machine
+ $1495.00
427ci SBF Dart #31365235 SHP Splayed Cap 4.1215″ Bore Race Block Fully CNC Race Prepped on Our Centroid 4 Axis CNC Machine
+ $1595.00
Direction Motion Fully CNC Ported 210cc Aluminum Heads Producing Another 40HP
+ $ 695.00
Dart Pro 1 Aluminum 195cc Cylinder Heads
+ $ 995.00
Dart Pro 1 210cc Fully CNC Ported Cylinder Heads
+ $1995.00
Pro Street Heat 408ci/525 Hp: Comp Cams Hyd Roller Cam Kit, Edelbrock Air Gap Performer RPM, 750cfm Double Pumper w/Spacer
+ $ 795.00
Maxx Pro Street Heat 427ci/605 Hp: Comp Cams Magnum Hyd Roller, 210cc Fully CNC Ported Heads, Victor Series Intake, 850cfm Double Pumper w/Spacer
+ $1295.00
Pro Series Main Cap CNC Stud Girdle Installed (needed for stock block upgraded hp versions only)
+ $ 350.00
K1 4340 Internally Balanced Steel Crank and K1 4340 H-Beam Steel Rods w/ARP 2000 Bolts
+ $ 895.00
Comp Cams Hydraulic Roller Cam with ERson Roller Lifter Package for Ultimate Torque and Power
+ $ 495.00
Moroso or Canton 7qt Front or Rear Sump Oil Pan for Your Chassis Application
+ $ 295.00
MSD Billet Drag Racing Distributor with Proper Curve Kit and Weights
+ $ 225.00
Holley #1228913 Mechanical Fuel Pump Installed, Plumbed w/#8 Fuel Line and In-line #8 Billet Filter, Edelbrock 8192 Regulator Kit Installed
+ $ 495.00
SFI 164 Tooth Flex-plate and SFI Harmonic Balancer Installed External or Internal for Upgraded 4340 Crank Option
+ $ 195.00
Fast EZ EFI Complete EFI System w/1100cfm TB Dyno Tested and Tuned for the Finest in Pro Street Drive-ability
+ $1995.00

Dyno T&T w/Exxon 93° Pump Gas • Vacuum Pump Installed • HP Corrected to Sea Level

Free freight applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges if any will be known to you before we ship.

Comments are closed.