408ci 525HP Pro Street Mopar Crate Engine

408ci 525Hp Pro Street Mopar Crate Engine

Brand New Pro Street Muscle Mopar Muscle Crate engine is designed with maximum performance for street or hot rod applications. EFI can be added very easy. Brand new internal parts for all critical areas in this engine as well as brand new Edelbrock Pro Street Heads are included. Dyno Tested and Tuned on a real dyno for a complete turn key engine with a video to YouTube supplied with Purchase


4.030 Bore | 4.0 Stroke | 6.125 Rod | 520lb @ 4000 rpm  and 525Hp @ 5600 rpm


  • Mopar 360 Magnum CNC Race Prepped 2 Bolt Main Block
  • Brass or Stainless Steel Freeze Plug Kit Installed
  • Head and Main Stud Kit Plate Honed with Block
  • AR, Eagle or Scat Externally Balanced Steel Crankshaft
  • AR, Eagle or Scat Steel I-Beam Steel Rods with ARP Bolts
  • Clevite or King Cam, Main and Rod Bearings
  • JE or Wiseco 10.7:1 Forged 2618 Pistons
  • Plasma Moly File to Fit Ring Set
  • Comp Cams .595″ Lift Hydraulic Roller Cam
  • Billet Roller 9 Position Billet Torrington Bearing Timing Set
  • Aluminum Timing Cover with TDC Verified Pointer
  • Erson Hydraulic Roller Lifters
  • PowerBond Externally Balanced Dampener
  • Edelbrock 18° Pro Street Ported Aluminum Heads 285/200cfm @ .600
  • Manley 2.050 and 1.600 Stainless Steel Valves
  • Comp Cams Hydraulic Roller Springs and Tool Steel Retainers
  • Fel Pro Head Gaskets and Complete Gasket Kit
  • Manley 3/8 x .135″ Thick Wall Push Rods
  • Comp Cams 1.6 Roller Rockers (NO CHINESE NOTHING)
  • Mopar Black Aluminum Valve Covers
  • Melling Oil Pump
  • AwesomeEngines® Moroso Oil Pan with Proper Pick Up
  • Edelbrock Match Ported Intake
  • Holley or QFT 750cfm Double Pumper 4150 Carburetor (is available)
  • MSD Distributor, 8.5mm Plug Wires and NGK Plugs (is available)
  • AwesomeEngines® T-Shirt

Available Upgrades

K1,  Eagle or Scat 4.0″ 4340 Internally Balanced 360 Forged Steel Crank and 6.0″ H Beam Steel Rods with ARP2000 Bolts and Custom Forged Piston
+ $1495.00
360-2 Indy 18° 230cc Cylinder Heads 2.100/1.625 valves Installed with M.P. Intake Manifold
+ $1295.00
Indy Fully CNC Ported 15° Aluminum Heads and Intake Manifold
+ $2495.00
Cometic or Fel Pro MLS Severe Duty Head Gaskets
+ $ 125.00
Total Seal Stainless Steel or TNT Rings
+ $ 195.00
T&D Shaft Roller Rocker System Installed
+ $1295.00
Holley or QFT 750 cfm Double Pumper Carburetor
+ $  695.00
MSD Billet Distributor with in House Curve Installed for Best Pro Street Power
+ $ 295.00
Jomar Phenolic Special CNC Ported Spacer Kit
+ $   85.00
Power Master Mini Starter
+ $  225.00
B&M Externally Balanced Flex Plate
+ $  130.00
Complete 50-519 ( 650hp )Sniper Complete with 160 Pump Fuel Injection System Installed, Dyno Tested and Tuned (Silver or Gold Color is Available)
+ $975.00

Dyno Tested and Tuned with 91-93° Pump Gas • Vacuum Pump • HP Corrected to Sea Level

Free insurance and freight of $450 applies to this item being shipped to a UPS terminal or commercial address in the con. 48 states for your zip code. Any handling fees, residential, lift gate service, out of area charges may apply over the $450. Total cost of all charges if any will be known to you before we ship.

Comments are closed.