408ci 525HP Pro Street Mopar Muscle Motor

408ci 525Hp Pro Street Mopar Muscle Motor

This Brand New Pro Street Muscle Mopar Crate engine is designed with maximum performance for street, muscle or hot rod applications. EFI can be added very easy. All brand new internal parts for all critical areas in this engine as well as brand new Edelbrock Por Street Heads are included. Dyno Tested and Tuned on a real dyno for a complete turn key engine with a video to YouTube supplied. Lets face it, if you do not get an EFI or carburetor and ignition system dyno tuned with your engine, you really do not know what you get? If you want the largest Small Block Chevy for your dream car, here it is.


4.030 Bore | 4.0 Stroke | 6.125 Rod | 520lb @ 4000 rpm  and 525Hp @ 5600 rpm


  • Mopar 360 Magnum CNC Race Prepped 2 Bolt Main Block
  • Brass or Stainless Steel Freeze Plug Kit Installed
  • Head and Main Stud Kit Plate Honed with Block
  • AR, Eagle or Scat Externally Balanced Steel Crankshaft
  • AR, Eagle or Scat Steel I-Beam Steel Rods with ARP Bolts
  • Clevite or King Cam, Main and Rod Bearings
  • JE or Wiseco 10.7:1 Forged 2618 Pistons
  • Plasma Moly File to Fit Ring Set
  • Comp Cams .595″ Lift Hydraulic Roller Cam
  • Billet Roller 9 Position Billet Torrington Bearing Timing Set
  • Aluminum Timing Cover with TDC Verified Pointer
  • Erson Hydraulic Roller Lifters
  • PowerBond Externally Balanced Dampener
  • Edelbrock 18° Pro Street Ported Aluminum Heads 285/200cfm @ .600
  • Manley 2.050 and 1.600 Stainless Steel Valves
  • Comp Cams Hydraulic Roller Springs and Tool Steel Retainers
  • Fel Pro Head Gaskets and Complete Gasket Kit
  • Manley 3/8 x .120″ Thick Wall Push Rods
  • Comp Cams 1.6 Roller Rockers (NO CHINESE NOTHING)
  • Mopar Black Aluminum Valve Covers
  • Melling Oil Pump
  • AwesomeEngines® Moroso Oil Pan with Proper Pick Up
  • Edelbrock Match Ported Intake
  • Holley or QFT 750cfm Double Pumper 4150 Carburetor (is available)
  • MSD Distributor, 8.5mm Plug Wires and NGK Plugs (is available)
  • AwesomeEngines® T-Shirt

Available Upgrades

AR, K1,  Eagle or Scat 4.0″ 4340 Internally Balanced 360 Forged Steel Crank and 6.0″ H Beam Steel Rods with ARP2000 Bolts and Custom Forged Piston
+ $1495.00
360-2 Indy 18° 230cc Cylinder Heads 2.100/1.625 valves Installed with M.P. Intake Manifold
+ $1295.00
Indy Fully CNC Ported 15° Aluminum Heads and Intake Manifold
+ $2495.00
Cometic or Fel Pro MLS Severe Duty Head Gaskets
+ $ 125.00
Total Seal Stainless Steel or TNT Rings
+ $ 195.00
T&D Shaft Roller Rocker System Installed
+ $1295.00
Holley or QFT 750 cfm Double Pumper Carburetor
+ $  695.00
MSD Billet Distributor with in House Curve Installed for Best Pro Street Power
+ $ 295.00
Jomar Phenolic Special CNC Ported Spacer Kit
+ $   85.00
Power Master Mini Starter
+ $  225.00
B&M Externally Balanced Flex Plate
+ $  130.00

Dyno Tested & Tuned • with 93° Exxon Pump Gas • MSD Distributor • QFT 750 Carb • HP Corrected to Sea Level

Comments are closed.