427ci 1000HP SBC Nitrous Race Engine

427ci 1000Hp SBC Nitrous Race Engine

This NOS Race Engine is not all top shelf, but needs nothing to add on for well over a 1000hp and up to 1400HP with our NX RNC 700HP Nitrous Kit. The World raised cam splayed cap race block works great and gives us a little more needed room for the camshaft. Comp Cams HIPPO roller lifters, Manley crank, 5.85 I beam steel rods, good pins, Hell Fire 043/043/3.0mm ring set, Cloyes billet timing set, 2 Piece Cover, ATI Dampener, Manley or Pac 1.550″ roller springs, MLS head gaskets, Moroso oil pump and pan, Crank Trigger all add up to a great priced right race engine.



9.000″ Deck | 4.125″ Bore | 4.000″ Stroke | 5.850″ Rods | 1100+HP 500Hp Tune @ 7000 rpm


  • World Products Raised Cam Steel Billet Cap Racing Block
  • Deck Machined for Oring and Copper SCE Racing Head Gaskets
  • ARP 12 Point Head Stud Kit Plate Honed with Block
  • Manley 4340 Internally Balanced Steel Crank
  • 5.850 I-Beam Severe Duty Rods with ARP2000 Bolts
  • King “HP” Coated Race Main, Rod and Calico Coated Cam Bearings
  • JE or Wiseco Gas Ported C-Skirt N2O Pro Series Nitrous Pistons
  • Tool Steel .180″ Wall Wrist Pins for NOS Application
  • TS 043/043/3mm NOS Stainless Steel, TNT or Hell Fire Rings
  • Comp Cams 50mm Solid Roller .750″ Lift 7/4 Swap Cam
  • Cloyes Billet True Roller with Torrington Bearing Timing Kit
  • Cloyes 2 Piece Removable Timing Cover
  • Comp Cams HIPPO Solid Roller Lifters
  • ATI Internally Balanced Specific Honed to Fit SFI Damper
  • AFR 235cc Fully CNC Ported Aluminum Heads
  • 2.125 Intake and 1.6″ Exhaust Stainless Steel Severe Duty Valves
  • Pac 1225 Roller Springs and 10° Titanium Retainers
  • SCE Copper Head Gaskets and Receiver Grooved Heads
  • Manley .135″ Wall Push Rods
  • Comp Cams Pro Magnum Roller Rockers and AFR Stud Girdle
  • AwesomeEngines® CNC Logo Powder Coated Valve Covers
  • Moroso 7qt.Eliminator Steel Kick Out Oil Pan and Oil Pump Kit
  • Nitrous Express RNC 750HP Plate System Kit
  • Edelbrock Super Victor 4150 Ported Intake Manifold
  • Holley or QFT 950cfm NOS Race Prepped Carburetor
  • Jomar Special CNC Ported Heat Sync Spacer
  • MSD Distributor, Crank Trigger, 8.5mm Wires, NGK Race Series Plugs
  • Completely Dyno Tested and Tuned

Available Upgrades

Steel Billet Caps
+ $450.00
Comp Cams RevZone No Needle Bearing Bushing Solid Roller Lifters
+ $495.00
AFR 245cc NPP Fully CNC Ported Cylinder Heads (will require shaft rockers)
+ $000.00
Jesel Shaft Rocker System Installed for Either Heads
+ $1195.00
Moroso 3 Vane Vacuum Pump System and Pump Mounted Relief Valve, Billet 3 Bolt Mandrel, Lines, Billet Tank and All Hardware
+ $1075.00
Ultra SFI Flex-plate Internally Balanced in House Flex-Plate and ARP Bolt Kit
+ $ 125.00
New Max-2000 Series 2000Hp Power Glide with Roller Bearing Extension and All Top Shelf Internals 60 Day Warranty
+ $3875.00
10″ Custom N2O Torque Converter with Steel Stator Custom Pump and Turbine Built for 2000HP
+ $1475.00
Power Master XL Series Race Starter
+ $ 275.00

Dyno Tested and Tuned Using 110 Race Gas • Vacuum Pump • HP Corrected to Sea Level

Free freight shipping does apply to this item shipped to the UPS terminal in the continental 48 states for your zip code given to ship. Any required insurance, residential, lift gate, or out of area charges, will apply for your area code where you choose this item to be shipped to for the terminal for your zip code area.

Comments are closed.