Ford FE 462ci 600Hp Pro Street Race Engine

Ford FE 462ci 600 Hp Pro Street Race Engine

We have been doing FE Street, Pro Street or Drag Racing Engines a Long Time up with a Stock Block as one of our Specialties we can custom make for You. Dyno Tested & Tuned with the right parts for your Hot Rod to be Amazingly Surprising

$10,995.00

Deck 10.150″ | Bore 4.160″ | Stroke 4.250″ | Rod 6.700″ | 600+Hp @ 5800 rpm

Components

  • Ford Production 2 Bolt Cap 100% CNC Race Prepped Block
  • ARP Head and Main Bolt Kit
  • Dura Bond Cam Bearing and Install Kit
  • Eagle or Scat 9000 Series Internally Balanced Cast Crank
  • H-Beam Rods with ARP 8740 Bolts
  • King Race Series Main and Rod Bearings
  • Diamond, JE, Mahle, or Wiseco Forged Aluminum Dish Pistons
  • Diamond, JE, Mahle or Wiseco .157″ Wall Wrist Pins
  • JE or Mahle Plasma Moly Rings
  • Comp Cams or Erson Pro Street Hydraulic Roller Cam and Lifters
  • Cloyes Billet True Roller Timing Set Kit
  • Externally Balanced Damper Specific Honed
  • TFS 175cc CNC Ported Heads or ProMaxx Shocker 200cc CNC
  • 2.190/1.625 220/1.730 SS Intake and Exhaust Valves
  • Manufactures Supplied Springs and Steel Retainers
  • Cometic or Fel Pro Head Gaskets
  • Manley or Trend 3/8″ x .135 Wall Severe Duty Push Rods
  • Shaft Rocker System Chrome Moly Steel or Aluminum
  • AwesomeEngines® CNC Engraved Logo Valve Covers
  • Moroso or Milodon 7qt. Specific Chassis Oil Pan
  • Melling HV Oil Pump and Pick Up Tube
  • MSD Distributor, 8.5mm Plug Wires, NGK Plugs
  • Edelbrock Performer 2105 Dual Plane 4150 Intake Manifold
  • Holley or Quick Fuel 950cfm Carburetor Package Kit

Available Upgrades

517ci Pro Street FE Ford Racing Engine Either Pump Gas or Race, it Does not Matter
+ $Call
ARP 2000 Rod Bolts
+ $275.00
ProMaxx Shocker 200 cc Fully CNC Ported Cylinder Heads for Maximum Horse Power You can get Needs Victor Intake Also to Make Really Good Power
+ $475.00
Edelbrock 2105 Match Ported to TFS or Shocker Heads
+ $395.00
Tool Steel Lightweight Retainers
+ $225.00
Jesel or T&D Shaft Rocker System
+ $1395.00
Edelbrock 2936 Victor Series Match Ported to TFS or Shocker Heads
+ $975.00
EFI Sniper Kit Dyno Tested and Tuned for EZ Operation
+ $1475.00
TFS-56400114 Intake Manifold, Tunnel Wedge, Medium Rise, Dual 750 cfm Carburetors and Linkage Kit and it Really Runs and Looks Different Under the Hood
+ $1975.00

Dyno Tested & Tuned Using Exxon 93° Pump Gas • HP Corrected to Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or the Terminal Closest to Your Zip Code for Pickup in the 48 States

Comments are closed.

Skip to toolbar