434ci 765HP SBC Bullet Race Engine

434ci 765Hp SBC Bullet Race Engine

$16,999.00

9.0″ Deck | 4.155″ Bore | 4.0″ Stroke | 6.0″ Rods | 765Hp @ 7400 rpm

Components

  • World Raised .125″ Cam Splayed Cap .842″ Bushed Race Block
  • 12 Point Pro Series Head Stud Kit Plate Honed with Block
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • K1 or Manley 4340 Internally Balanced Steel Crank
  • K1 or Manley, Scat H-Beam Steel Stroker Rods with ARP 2000 Bolts
  • King HP Race Series Main and Rod Bearings
  • JE or Wiseco Lil Quick 16 Forged Gas Ported Coated Skirt 15:1 Pistons
  • .180 Thick Wall Tool Steel Wrist Pins Included
  • Total Seal Stainless Steel or Hell Fire .043 .043 3.0 mm Ring Package
  • Comp Cams .750″ Lift 7/4 Swap Steel Billet Roller Cam
  • Cloyes Billet Timing Set with Torrington Bearing
  • Solid Polished Aluminum Timing Cover
  • Comp Cams HIPPO (Hi-pressure pin oiling) Solid Roller Lifters
  • ATI Super Damper and Billet TDC Pointer
  • ARF 245cc NPP 23° Fully CNC Ported Heads 350cfm @.800
  • AFR 8mm 2.125″ Intake and 1.600″ Exhaust Stainless Steel Valves
  • Pac 1225 1.550″ Springs and Titanium Retainers
  • Cometic or Fel Pro MLS NOS Racing Head Gaskets
  • Trend 7/16″ x .165″ Wall Extreme Duty Push Rods
  • Jesel or T&D Shaft Rocker System Installed
  • AwesomeEngines® CNC Engraved Logo Valve Covers
  • Moroso Oil Pump with Tig Welded Pick Up Kit
  • Moroso #21047 Pro Eliminator Kick Out Oil Pan
  • CNC Fully Ported Edelbrock 2825 Intake Manifold
  • Holley Ultra or QFT 4150/1050 cfm Dyno Tuned Carburetor
  • Jomar Special CNC Ported Heat Sink Spacer
  • Crank Trigger, Moroso Wires, MSD Distributor, NGK Plug Kit
  • AwesomeEngines® T-Shirt, (free 48 freight, see below)

Available Upgrades

Dart Iron Eagle Steel Billet Cap .390″ BBC Raised Cam Spread Oil Pan Fully CNC Race Prepped to Perfection Racing Block
+ $1095.00
Dart or Brodix Aluminum Light Weight Racing Block
+ $3995.00
Callies Magnum Series Internally Balanced Crank (may require heavy metal)
+ $1575.00
Callies XL Series 46lb Light Weight Crank Shaft (will require no heavy metal)
+ $1995.00
Oliver Steel I Beam Severe Duty Rods
+ $   895.00
Callies Ultra I Beam Severe Duty Rods (best in the business)
+ $1095.00
Isky Red Zone with EZK Needle Free Bushed Roller Lifters
+ $   825.00
Jesel Raised Cam Belt Drive Installed and Makes the Valve Train Very Smooth (either block .125 or .390 raised cam)
+ $1295.00
ATI Aluminum Hub Light Weight Dampener
+ $  125.00
Moroso Complete Vacuum Pump System with Pump Mounted Relief Valve and Billet Front Drive Mandrel System Installed (5+hp)
+ $1095.00
Moroso Aluminum Pro Eliminator Kick out Style Racing Oil Pan (5+hp)
+ $   395.00
Edelbrock 28251/4500 Fully CNC Ported Intake Manifold and Jomar Custom CNC Ported Spacer and 4500 Series Carburetor (5+hp)
+ $  795.00
Rons Terminator Injection System Installed, Dyno Tested and Tuned
+ $1995.00
Ultra SFI 168 or 153 Tooth Flex-plate Internally Balanced in House with ARP Bolts
+ $   125.00
Power Master High Torque Gear Reduction Made in the USA New Design Starter
+ $   225.00

Dyno T&T with 112 Race Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free freight applies to this item shipped to the closest UPS Terminal for your Zip Code in the continental 48 states. Handling fees, added insurance, residential, lift gate service, out of area fees if any, may apply for your destination where you have this item shipped to. Any extra cost of any of these charges will be known to you before we ship, Thankyou

 

Comments are closed.