434ci 730Hp SBC Bullet Race Engine

434ci 730Hp SBC Bullet Race Engine

$15,999.00

4.155″ Bore | 4.0″ Stroke | 6.0″ Rods | 555 lb @ 5800 rpm 730 Hp @ 7000 rpm

Complete Turn Key Racing Engine to Drop in and go

Components

  • World Raised Cam Steel Billet Splayed Cap Race Block
  • Fully Dead On CNC Race Prepped to Perfection Specifications
  • Brass or Stainless Steel Freeze Plugs Installed
  • ARP Pro Series 12 Point Head Stud Kit Plate Honed with Block
  • K1 or Manley 4340 Internally Balanced 4.000″ Crank Shaft
  • K1 or Manley 4340 H Beam 6.000″ Stroker Steel Rods with ARP2000 Bolts
  • King HP Race Series Main, Rod and Cam Bearings
  • JE Forged .175″ Dome 15:1 High Compression Racing Pistons
  • JE Plasma Moly File to Fit  043/043/3.0mm Racing Ring Set
  • Comp or Erson .725″ Lift Steel Billet 7/4 Swap Solid Roller Cam
  • Steel Billet True Roller Adjustable Timing Chain Kit and Torrington Brg
  • Solid Polished Aluminum Timing Cover and Billet TDC Pointer
  • Comp Cams HIPPO Solid Roller Lifters
  • PowerBond SFI Approved Internally Balanced Damper and Billet Pointer
  • Brodix 233 or Pro Filer Sniper 235cc Fully CNC Ported Aluminum Heads
  • Brodix or Erson Competition Series 2.125 Intake and 1.600 Exhaust Valves
  • Pac 1.55″ Roller Springs, 10° Titanium Retainers and 10° Locks
  • Cometic MLS Head Gaskets and Fel Pro Intake Manifold Gaskets
  • Erson 5/16 x .120″ Wall” Push Rod Set
  • Harland Sharp 1.6 Roller Rockers Jomar Stud Girdle Kit
  • AwesomeEngines® CNC Engraved Valve Covers
  • Moroso 22124 Oil Pump, Stud, Shaft, Pickup Complete Kit
  • Moroso 7 Qt. Oil Pan and One Piece Oil Pan Gasket
  • Pro Filer Sniper 4150 CNC Match Ported Intake with ARP Intake Bolts
  • Jomar Special 4150 CNC Ported Spacer
  • QFT 4150 1050 Carb, #6 Fittings and Stud Kit
  • MSD 85561 Billet Dist, Bronze Gear, MSD 31199 Wires NGK Plugs
  • Completely Dyno Tested and Tuned Racing Engine

Available Upgrades

Dart Iron Eagle Steel Billet Splayed Cam Racing Block with BBC Cam Bearings and .725″ Camshaft Included
+ $ 995.00
If Available a Callies Dragon Slayer 4340 USA Center Counter Weight Crank Shaft Internally Balanced with 4 pieces of Mallory
+ $1295.00
Crower Enduro 4340 or Callies Magnum USA Center Counter Weight Crank Shaft Internally Balanced with 4 pieces of Mallory
+ $1695.00
Oliver Steel I Beam Rods
+ $ 995.00
Isky Max Series Red Zone Best in the Business Severe Duty Roller Lifters with Solid Bushing Roller Wheels
+ $ 825.00
Erson or Manley 3/8 x .135″ Heavy Duty Push Rods
+ $ 295.00
Jesel Belt Drive Installed
+ $ 895.00
Moroso Billet #22171 Oil Pump Installed
+ $ 275.00
Moroso Aluminum Kick Out Power Making Partitioned and Louvered Windage Tray Cap Divider Drag Race Oil Pan
+ $ 495.00
SFI 168 Tooth Flex-Plate Internally Balanced in House with ARP Bolt kit
+ $ 125.00
Power Master High Torque Made in the USA Mini Starter and Bolt Kit
+ $ 245.00
Moroso 3 Vane Complete Vacuum Pump System Installed and Dyno Tuned with Engine
+ $ 995.00
ATI Super Dampener Specific Honed to Fit the Crank Snout Used
+ $ 275.00

Dyno Tested and Tuned with C12 Race Fuel • Vacuum Pump • HP Corrected to Sea Level

Free freight applies to this item shipped to the closest UPS Terminal for your Zip Code in the continental 48 states. Handling fees, added insurance, residential, lift gate service, out of area fees if any, may apply for your destination where you have this item shipped to. Any extra cost of any of these charges will be known to you before we ship, Thankyou

Comments are closed.