434ci 730 HP SBC Pro Bracket Race Engine

434ci 730 Hp SBC Pro Bracket Race Engine

Complete Turn Key Racing Engine $13,995.00

4.155″ Bore | 4.000″ Stroke | 6.000″ Rods | 580 lb @ 5800 rpm 730 Hp @ 7000 rpm



  • Dart Little M Splayed Cap Block CNC 4 Axis Race Prepped
  • Stainless Steel Life Time Freeze Plug Kit Installed
  • ARP 234-4301 12 Point Head Stud Kit Plate Honed with the Block
  • Callies CompStar, K1, Eagle or Scat Forged 4340 Internally Balanced  Crank
  • Callies CompStar, K1 or Scat Stroker H-Beam 4340 Rods with ARP2000
  • King HP Race Series Main and Rod Bearings
  • JE or Wiseco 14.2:1 Forged Racing Pistons
  • JE or Wiseco .154 Wall Steel Wrist Pins
  • Total Seal File to Fit 043/043/3mm Plasma Moly Racing Ring Set
  • Comp Cams .710″ Lift 7/4 Swap Steel Billet Solid Roller Cam
  • Comp Cams “HIPPO” USA Made Severe Duty Solid Roller Lifters
  • Cloyes Billet True Roller Timing Kit Torrington or Bronze Bushing
  • Polished Aluminum Timing Cover with Billet TDC Pointer
  • ATI Super Damper Specific Honed to Fit Crank Snout
  • AFR #1132/235cc Competition CNC Ported Heads 340/246@ .800
  • AFR 2.125″ Intake, 1.600″ Exhaust 8mm 10° Bead Lock SS Valves
  • Pac Racing 1.550″ .710″ Lift Roller Springs, 10° Titanium Retainers
  • Fel Pro #1010 Pre-Flattened Racing Head Gaskets
  • Manley Chrome Moly .105″ Wall Push Rods
  • Harland Sharp # 6036/1.6 Roller Rockers and AFR Stud Girdle
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso 22124 Oil Pump with Tig Welded Pickup Kit
  • Moroso #20190 7 Qt. Oil Pan
  • Edelbrock SV 4150 Single Plane Racing Intake Manifold
  • Holley or QFT 950cfm Carb fully Dyno Tested and Tuned
  • Jomar CNC Ported 3D Intake Heat Sync Spacer
  • MSD Pro Billet Distributor, Crank Trigger, Wires and NGK Spark Plugs
  • Free 48 State Freight

Available Upgrades

Dart Iron Eagle Raised BBC Cam Wider Oil Pan Rail Block with Steel Billet Splayed Main Caps Fully CNC Race Prepped
+ $ 695.00
Brodix or Dart Raised Cam Aluminum Race Block with Special Head Stud Kit
+ $3995.00
Callies #SMU21A Magnum or Crower #E95129X4 Enduro Crankshaft; Excellent for Power Adders
+ $1495.00
Callies SOU-21A-XL Magnum XL Super Lightweight No Drill Internally Balanced Racing Crank Shaft
+ $1995.00
Callies Ultra H Beam Stroker Steel Rods with ARP L19 Rod Bolts
+ $ 695.00
Isky EZ Roll Max Solid Bushing Roller Lifters and there is None Better for Racing
+ $ 875.00
Total Seal Stainless Steel, TNT or Hell Fire Nitrous Rings
+ $ 195.00
Total Seal Tool Steel Top Ring Set for Power Adders
+ $ 395.00
Pac Racing .800″ Lift Racing Spring Retainer Package
+ $195.00
Jesel or T&D Pro Series 1.6 Shaft Rockers Installed
+ $1095.00
Fel Pro MLS Severe Duty N2O Head Gaskets
+ $ 125.00
Jesel Raised Cam Belt Drive System Installed
+ $1295.00
Moroso Complete 3 Vane New Vacuum Pump System Installed
+ $ 1075.00
ATI Super Damper Super Light with Aluminum Hub Specific Honed to Fit Crank Snout
+ $ 125.00
AFR245cc Big Port No Push Rod Pinch Heads with Jesel or T&D 1.6 Ratio Shaft Rocker System Installed, 7/16 Push Rods =(+25hp)
+ $1795.00
Moroso #21017 Eliminator Kick Out Right Side, Louvered Tray with Main Cap Partitions Oil Pan with 22134 HV Oil Pump Kit
+ $ 295.00
SFI 168 Tooth Flex-Plate Internally Balanced in House with ARP Bolts
+ $ 125.00
Power Master High Torque Gear Reduction Made in the USA New Design Heavy Duty Starter
+ $ 225.00
Rons Alky Injection System Completely Installed, Dyno Tested and Tuned and the most consistent Racing Upgrade you can Buy
+ $1995.00

Dyno Tested and Tuned with Race 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free freight applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges if any will be known to you before we ship.

Comments are closed.