434ci 800+HP LS Bullet Race Engine

434ci 800+Hp LS Bullet Race Engine

$18,999.00

4.155″ Bore | 4.0″ Stroke | 6.125″ Rods | 660 lb @ 5800 rpm 800+Hp @ 7600 rpm

Components

  • Dart SHP LS NEXT GEN III Cast Iron Steel Billet Splayed Cap Race Block
  • Fully Dead On CNC Race Prepped to Perfection Specifications
  • Brass or Stainless Steel Freeze Plugs Installed
  • ARP Pro Series 12 Point Head Stud Kit Plate Honed with Block
  • K1 or Manley 4340 Internally Balanced 4.000″ Crank Shaft 58X
  • K1 or Manley 4340 H Beam 6.125″ Stroker Steel Rods with ARP2000 Bolts
  • King HP Race Series Main, Rod and Cam Bearings
  • JE or Wiseco Forged 13:1 High Compression Racing Pistons
  • JE Plasma Moly File to Fit 043/043/3.0mm Racing Ring Set
  • Comp or Erson .750″ Lift Steel Billet 55mm Solid Roller Cam
  • Steel Billet True Roller Adjustable Timing Chain Kit
  • LS New Timing Cover and Billet TDC Pointer
  • Comp Cams HIPPO NBO Bushed Solid Roller Lifters
  • ATI SFI Approved Internally Balanced Damper Specific Honed to Fit
  • GM 88958758 LS 3 Fully CNC Ported Aluminum Heads
  • GM Competition Series 2.165 Intake and 1.600 Exhaust Valves
  • Pac Roller Springs and Titanium Retainers
  • Cometic MLS Head Gaskets and Fel Pro Intake Manifold Gaskets
  • Manley or Trend 3/8 .135″ Push Rods
  • Jesel or T&D Shaft Mounted Rocker Arm Kit 1.7 LS3
  • AwesomeEngines® CNC Engraved Valve Covers
  • LS Oil Pump and Pickup Complete Kit
  • Moroso 7 Qt. Oil Pan and GM Rear Cover
  • GM LS3 Match Ported Intake Manifold
  • Jomar CNC Ported Spacer
  • QFT 1050 Carb, #6 Fittings and Stud Kit
  • MSD 19355418 Control Box, Coils and NGK Plugs
  • Completely Dyno Tested and Tuned Racing Engine

Available Upgrades

Dart LS NEXT Gen III Cast Iron Steel Billet Splayed Cam Racing Block
+ $ 995.00
Dart LS NEXT Gen III Aluminum Block and Oil Pan rail Spacers
+ $3995.00
Crower Enduro or Callies 4340 Magnum USA 58X Crank Shaft
+ $1595.00
Oliver Steel I Beam Rods
+ $ 895.00
Callies Ultra I Beam Steel Rods with L19 Bolts
+ $995.00
Hell Fire Ring Package for Power Adders and HP over 1000
+ $ 195.00
.200″ Wall Tool Steel Wrist Pins for Power Adders and HP over 1000
+ $ 195.00
LSXDR 11° Fully CNC Ported Heads with 2.280/1.620 Valves and Match Ported Dominator Intake Manifold
+ $3975.00
NX Plate System up to 700HP
+ $999.00
NX Fogger System Installed up to 600HP
+ $1599.00
Jesel Front Belt Drive System with Front Drive Distributor
+ $1695.00
Moroso 3 Vane Complete Vacuum Pump System Installed and Dyno Tuned with Engine
+ $ 995.00
ATI Super Dampener with Crank Trigger Magnets Specific Honed to Fit the Crank Snout Used
+ $ 195.00

Dyno Tested and Tuned with C12 Race Fuel • Vacuum Pump • HP Corrected to Sea Level

Free freight applies to this item shipped to the closest UPS Terminal for your Zip Code in the continental 48 states. Handling fees, added insurance, residential, lift gate service, out of area fees if any, may apply for your destination where you have this item shipped to. Any extra cost of any of these charges will be known to you before we ship

Comments are closed.