440ci 600HP SB Mopar Street Heat Crate Engine

440ci 600HP SB Mopar Street Heat Crate Engine

$13,999.00

4.155″ Bore | 4.000″ Stroke | 6.000″ Rod | 6600 rpm

Components

  • Siamese 4 Bolt Main Block CNC Race Prepped
  • Brass or Stainless Steel Freeze Plug Kit Installed
  • ARP Head Stud Kit Plate Honed w/Block
  • AR, Eagle, Scat K1 Internally Balanced 4340 Steel Crank
  • AR, Eagle, Scat, K1 Steel H-Beam Rods and ARP Bolts
  • King “HP” Series Main and Rod Bearings
  • JE or Wiseco 10.75:1 Forged 2618 Pistons
  • Total Seal Plasma Moly Rings
  • Comp Cams .600″ Lift Solid or Hydraulic Roller Cam
  • Cloyes True Roller Billet Timing Set
  • Aluminum Timing Cover w/TDC Verified Pointer
  • Comp Cams Hydraulic or Solid Roller Lifters
  • AR SFI Internally Balanced Harmonic Damper
  • Direct Motion Fully CNC Ported Aluminum Cylinder Heads
  • Manley 2.050 and 1.625 Race Master Stainless Steel Valves
  • Comp Cams Light Weight Bee-Hive Springs and Light Weight Retainers
  • Fel Pro Hi-Performance Head Gaskets
  • Manley Thick Wall Chrome Moly Push Rods
  • Harland Sharp Shaft Rocker Roller Rocker Kit
  • Mopar Performance Valve Covers
  • Melling Blue Printed HV Oil Pump
  • AR Moroso Stroker Oil Pan w/Proper Pick Up
  • Edelbrock RPM Air Gap or Victor Intake Manifold
  • AR-850cfm 4150 Double Pumper Carburetor
  • MSD Billet Distributor, 8.5mm Wires, NGK Plugs
  • free 48 state freight

Available Upgrades

T&D Shaft Rocker System
+ $ 795.00
ATI Super Damper Specific Honed to Fit
+ $ 295.00
Moroso Complete Dyno Tested Vacuum Pump System Installed
+ $ 995.00
Indy 360-1 245cc 15° 700HP Combination with Fully CNC Ported Aluminum Heads and T&D Shaft Rocker Arms
+ $2495.00
CNC Match Ported then fully ported Edelbrock RPM Air Gap or Victor Manifold and Special CNC Ported Spacer
+ $ 795.00
Jomar 3 D Special CNC Ported Spacer, Studs, Gaskets and Ported to Manifold Heat Sync
+ $ 125.00
Manley 3/8″ x .120″ Wall Extreme Duty Push Rods
+ $ 295.00
MSD Blaster Coil Set up for Ready to Run Distributor
+ $   75.00
New Water Pump, Flex-plate, HP Starter
+ $ 395.00
New Mod Manifold w/Variable Top Plates Available
+ $ 299.00

Dyno Tested and Tuned • 93° Pump Gas Fuel • Moroso Vacuum Pump • HP Corrected to Sea Level

Comments are closed.