440ci 760HP SBC Pro Magnum Racing Engine

440ci SBC Race Engine with the very best internals as well as a Dart block and AFR 23° NPP heads for a proven power making engine combination for bracket racing as well as the power adder classes when or if needed any time you want.


9.0″ Deck | 4.185″ Bore | 4.0″ Stroke | 6.0″ Rods | 760Hp @ 7400 rpm


  • Dart Iron Eagle Block with .390″ Raised BBC Cam Bearings
  • Brass or Stainless Steel Life Time Freeze Plug Kit Installed
  • ARP 12 Point Specific Fit Head Stud Kit Plate Honed with Block
  • Callies Magnum 4340 Internally Balanced Dual Key Way Crank
  • Callies Ultra, Crower or Oliver Steel I-Beam Rods with L19 Bolts
  • Clevite or King HP Series Severe Duty Main and Rod Bearings
  • Wiseco 15.09:1 Gas Ported Coated Skirt Light Weight Forged Pistons
  • Total Seal TNT or Hell Fire 043-043-3mm Low Tension Rings
  • Comp Cams .825″ Lift BBC Base Circle Steel Billet 7/4 Swap Cam
  • Cloyes True Roller Billet Timing Set with Torrington Bearing
  • New Polished Aluminum Front Timing Cover and Billet Pointer
  • Comp Cams .842″ HIPPO (hi-pressure pin oiling) Roller Lifters
  • ATI Super Damper Specific Honed to Fit and Billet TDC Pointer
  • AFR 245cc NPP 23° Fully CNC Ported 65cc Aluminum Heads
  • AFR 8mm 2.125″ Intake. and 1.600″ Exh. Stainless Steel Valves
  • Pac Racing 1.55″ Lightweight Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Severe Duty Head Gaskets
  • Manley or Trend 7/16 x .165″ Wall Severe Duty Push Rods
  • Jesel or T&D Pro Series One Piece Shaft Rocker System Installed
  • AwesomeEngines® CNC Engraved Powder Coated Covers
  • Moroso 22171 Billet Oil Pump with Integral Screen
  • Moroso Aluminum Pro Eliminator Side Kick Out Oil Pan
  • Edelbrock Super Victor CNC Match Ported Intake Manifold
  • QFT 1050cfm 4150 Series Carburetor, Fuel Fittings and Studs
  • MSD Distributor, Crank Trigger, 8.5mm UTH Wires and NGK Plugs
  • Free 48 State Freight

Available Upgrades

454ci Rotator and all Machine work for 4.125 crank and 4.185 Final Bore with Steel I Beam Rods Only
+ $ 695.00
55mm Cam Bearings and a 55mm Big Cam, and .904″ Lifter Bores 20hp
+ $1295.00
Brodix or Dart Raised Cam Aluminum Block Fully Race Prepped and Special Head Stud Kit
+ $3495.00
Callies XL 44-46lb. Magnum Series 4340 Internally Balanced Light Weight Crank and Heavy Metal Included 10+hp
+ $1295.00
Jesel Raised Cam Belt Drive System Installed for the Best Valve Train Protection you can get
+ $1295.00
Isky Red Zone EZ Max Solid Bushing Roller Lifters (the best roller lifter available)
+ $ 895.00
Moroso Vacuum Pump Complete Kit with New Pump Mounted Relief Valve, Billet Light Weight Mandrel, Lines, Fittings Pullies Dyno Tested
+ $1095.00
Nitrous Express Shark 200-600Hp System Installed
+ $1495.00
Special KICS “Keep it cool system installed”, all hoses plumbed and brought out from block and heads to intake
+ $ 695.00
Ron’s Terminator Fuel Injection Installed and Dyno Tuned for another 20+Hp
+ $1995.00

Dyno T&T with 116 Race Fuel • Vacuum Pump • 55mm Cam and Bearings • XL Crank • HP Corrected to Sea Level

Comments are closed.