440ci 760HP SBC Bullet Race Engine

440ci 760Hp SBC Pro Bullet Race Engine

$16,975.00

9.0″ Deck | 4.185″ Bore | 4.0″ Stroke | 6.0″ Rods | 760Hp @ 7200rpm

Components

  • Dart Iron Eagle Steel Billet Splayed Cap Race Block
  • 12 Point Pro Series Head Stud Kit Plate Honed with Block
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • K1 or Manley 4340 Internally Balanced Steel Crank
  • K1 or Manley Steel H-Beam Rods with ARP 2000 Bolts
  • King HP Race Series Main and Rod Bearings
  • Wiseco Lil Quick 16 Forged Gas Ported Coated Skirt 15:1 2618 Pistons
  • .180 Tool Steel Thick Wall Wrist Pins Included
  • Total Seal .043 .043 3.0 mm Ring Package
  • Comp Cams .800″ Lift 7/4 Swap Steel Billet Roller Cam
  • Cloyes Billet Timing Set with Torrington Bearing
  • Solid Polished Aluminum Timing Cover
  • Comp Cams HIPPO (Hi-pressure pin oiling) Solid Roller Lifters
  • ATI Super Damper and Billet TDC Pointer
  • ARF 245cc NPP 23° Fully CNC Ported Heads 350cfm @.800
  • AFR 8mm 2.125″ Intake and  1.600″ Exhaust Stainless Steel Valves
  • Pac 1.550″ Roller Springs and Tool Steel Life Time Retainers
  • Fel Pro 1014 Racing Head Gaskets
  • Trend 7/16″ x .165″ Wall Extreme Duty Push Rods
  • Jesel or T&D Shaft Rocker System Installed
  • AwesomeEngines® CNC Engraved Logo Valve Covers
  • Moroso Oil Pump with Tig Welded Pick Up Kit Installed
  • Moroso #21047 Pro Eliminator Kick Out Oil Pan
  • CNC Match Ported SV or ProFiler Intake Manifold
  • Holley Ultra or QFT Black Diamond 1050 CFM 4150 Carburetor
  • Jomar CNC Ported Heat Sink Spacer
  • Crank Trigger, Moroso Wires, MSD Distributor, NGK Plugs
  • free 48 freight, see below

Available Upgrades

Brodix or Dart Aluminum Block Fully CNC Race Prepped to Perfection and 100lbs Lighter and ARP Special Head Stud Kit (55mm cam ava add $495)
+ $3995.00
Callies Magnum Lighter Series Internally Balanced Crank (as much as 15+hp but may require heavy metal)
+ $1495.00
Callies XL Series 46lb Light Weight Crank Shaft (will require no heavy metal)
+ $2095.00
Oliver Steel I Beam Severe Duty Rods
+ $   895.00
Callies Ultra I Beam Severe Duty Rods (best in the business)
+ $1095.00
Total Seal Stainless Steel, TNT or Hell Fire Severe Duty Ring Package
+ $   175.00
Jesel Belt Drive Installed and Makes the Valve Train Very Smooth (either block .125 or .390 raised cam)
+ $1295.00
ATI Aluminum Hub Light Weight Dampener
+ $  125.00
Jesel or TD Pro Series Shaft Rocker System with Roller Tip Option Installed
+ $  395.00
Moroso Vacuum Pump System Installed (5-10+hp)
+ $1095.00
Moroso Aluminum Pro Eliminator Kick out Style Racing Oil Pan (5-10+hp)
+ $   395.00
Moroso External Oil Pump Kit with Special Sump Aluminum Pro Eliminator Oil Pan Kit (5-10+hp)
+ $   795.00
Rons Terminator Injection System Installed, Dyno Tested and Tuned
+ $1995.00
Ultra SFI 168 or 153 Tooth Flex-plate Internally Balanced in House with ARP Bolts
+ $   125.00
Power Master High Torque Gear Reduction Made in the USA New Design Starter
+ $   225.00

Dyno T&T with 112 Race Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free freight applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges if any will be known to you before we ship.

Comments are closed.