440ci 600HP SB Mopar Street Heat Engine

440ci-472ci 605HP SB Mopar Maxx Pro Street Engine

$12,999.00

Up to 4.185″ Bore | 4.000″ Stroke | 6.125″ Rod | 6400 rpm Pro Street Combination

Components

  • New Mopar 360 P5153452 Siamese 4 Bolt Main Block CNC Race Prepped
  • Brass or Stainless Steel Freeze Plug Kit Installed
  • ARP Head Stud Kit Plate Honed w/Block
  • AR-K1 Internally Balanced 4340 Steel Crank
  • AR-K1 Steel Billet H-Beam Rods w/ARP Bolts
  • King “HP” Series Main and Rod Bearings
  • Wiseco 10.75:1 Forged 2618 Pistons
  • Total Seal Plasma Moly Rings
  • Comp Cams Street Heat Grind .600″ Hydraulic Roller Cam
  • Cloyes True Roller Billet Timing Set
  • Aluminum Timing Cover w/TDC Verified Pointer
  • Comp Cams 8920 Severe Duty Roller Lifters
  • SFI Internally Balanced Harmonic Damper
  • Comp Cams Steel Maxx Heads Bowl Ported and Cleaned up Nicely
  • Manley 2.050/1.625 Race Master Stainless Steel Valves
  • Comp Cams Light Weight Bee-Hive Springs w/Light Weight Retainers
  • Fel Pro Hi-Performance Head Gaskets
  • Manley Thick Wall Chrome Moly Push Rods
  • Comp Cams Aluminum Roller Rockers
  • Mopar Performance Valve Covers
  • Melling Blue Printed HV Oil Pump
  • AR-Moroso Stroker Oil Pan w/Proper Pick Up
  • Edelbrock RPM Air Gap or Victor Intake Manifold
  • AR-850cfm 4150 Double Pumper Carburetor
  • MSD Ready to Run Distributor, 10.5mm Wires, NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

T&D or Jesel Sportsman, Either Shaft Rocker System can be Installed
+ $ 850.00
ATI Super Damper can be Installed
+ $ 250.00
Moroso Complete Dyno Tested Vacuum Pump System Installed
+ $ 995.00
Indy 360-1 245cc 15° 700HP Combination w/Fully CNC Ported Aluminum Heads w/T&D Shaft Rocker Arms
+ $2495.00
CNC Match Match Ported then fully ported Edelbrock RPM Air Gap or Victor Manifold w/Special Spacer
+ $ 595.00
Jomar 3 D Special CNC Ported Spacer, Studs, Gaskets and Ported to Manifold Heat Sync
+ $ 125.00
Manley 3/8″ x .120″ Wall Extreme Duty Push Rods
+ $ 295.00
MSD Blaster Coil Set up for Ready to Run Distributor
+ $   75.00
New Water Pump, Flex-plate, HP Starter
+ $ 395.00
New Mod Manifold w/Variable Top Plates Available
+ $ 299.00

>Dyno Tested & Tuned • 93° Fuel • Moroso Vacuum Pump • HP Corrected to Sea Level

Comments are closed.