440CI 770HP SBC Bullet Race Engine

440ci 770Hp SBC Bullet Race Engine


Complete Turn Key Nitrous Ready to Use Race Engine; Drop in and go with all Upgrades Included @ No Extra Charge *

4.185″ Bore | 4.0″ Stroke | 6.0″ Rods | 620lb @ 5800 rpm / 770Hp @ 7200 rpm


  • World Raised Cam Steel Billet Splayed Cap NO Notch Rod Race Block*
  • Dead On CNC Race Prepped to Perfection Machining Process
  • ARP Pro Series 12 Point Head Stud Kit Plate Honed with Block
  • K1 or Manley 4340 Internally Balanced Steel Crank Shaft*
  • K1 or Manley 4340 H Beam Steel Stroker Rods with ARP2000 Bolts*
  • Clevite or King HP Race Series Main and Rod Bearings
  • JE/Wiseco Forged .175″ Dome 15:1 Compression Racing Pistons*
  • .180″ Wall Tool Steel Wrist Pins Ready for NOS*
  • Hell Fire Ready for NOS 043/043/3.0mm File Fit Light Weight Ring Set*
  • Comp or Erson .775″ Lift Steel Billet 7/4 Swap Solid Roller Cam*
  • Billet True Roller Adjustable Timing Kit with Torrington Bearing
  • Solid Polished Aluminum Timing Cover and Billet TDC Pointer
  • Comp Cams HIPPO Severe Duty Solid Roller Lifters*
  • ATI SFI Approved Internally Balanced Damper Specific Hone to Fit*
  • ARF 245cc NPP 23° Fully CNC Ported Heads 350cfm @.800
  • AFR 8mm 2.125″ Intake and 1.600″ Exhaust Stainless Steel Valves
  • Pac 1.550″ Roller Springs, 10° Titanium Retainers and 10° Locks
  • Cometic or Fel Pro MLS Racing Head Gaskets Ready for NOS*
  • Manley 3/8 x .135″ Wall” Chrome Moly Push Rods*
  • Jesel or T&D 1.6/1.6 Shaft Rocker System Installed*
  • AwesomeEngines® CNC Engraved Powder Coated Valve Covers
  • Moroso 22124 Oil Pump, Stud, Shaft, Pickup Complete Kit
  • Moroso 7qt #21017 Kick Out Eliminator Series Oil Pan*
  • Edelbrock SV CNC Match Ported and Runner Clean Up Manifold
  • Jomar CNC Ported 4 Hole Spacer Kit
  • Holley/QFT 1050 Carb, #6 Fittings and Stud Kit*
  • MSD 84697 Distributor, Bronze Gear, Crank Trigger 8.5mm Wires, NGK Plugs*
  • SFI Internally Balanced Flexplate and ARP Bolt Kit*

Available Upgrades

Dart Iron Eagle Steel Billet Splayed Cap BBC Cam Bearings Wide Oil Pan Racing Block and BBC Camshaft
+ $ 795.00
Callies Magnum or Crower Enduro USA Center Counter Weight Crank Shaft Internally Balanced with 2 pieces of Heavy Metal Included
+ $1495.00
Oliver Steel I Beam Rods or Callies Ultra Series H Beam Rods with L19 Bolts
+ $ 895.00
Comp Cams Hippo Severe Duty Bushed Roller Lifters with NO Needle Bearings
+ $ 495.00
Isky Max Series Red Zone Hippo Severe Duty Bushed Roller Lifters with NO Needle Bearings
+ $ 795.00
625lb @ 5800/ 770Hp Brodix 234cc Oval Port Head Hunter 2.150/1.572; Flow 345/248 @ .800 Lift, Pac 1.55, T&D Shaft Rockers, CNC Ported Manifold
No Charge
Jesel Belt Drive Installed
+ $ 995.00
Power Master High Torque Made in the USA Mini Starter and Bolt Kit
+ $ 245.00
Moroso Aluminum Kick Out Partitioned and Louvered Windage Tray Cap Divider Drag Race Oil Pan
+ $ 475.00
Moroso 3 Vane Complete Vacuum Pump System Installed and Dyno Tuned with Engine
+ $1045.00

Dyno Tested and Tuned with C12 Race Fuel • Vacuum Pump • HP Corrected to Sea Level

Free freight applies to this item shipped to the closest UPS Terminal for your Zip Code in the continental 48 states. Any requested handling fees, added insurance, residential, lift gate service, out of area special fees are available for your exact destination where you can have this item shipped to. Any or all of the extra cost for any of these charges will be known to you before we ship it if you want or need any of these extra available services

Comments are closed.