443ci 1250 Hp SBC Nitrous Engine Special

443ci 1250 Hp SBC Nitrous Engine Special


9.000″ Deck | 4.200″ Bore | 4.000″ Stroke | 5.850″ Rods | 1250 HP with a 500 Hit of NOS @ 7000 rpm


  • Dart #31122212Raised Cam Iron Eagle CNC Race Prepped Block
  • Deck Machined for Oring and Copper SCE Racing Head Gaskets
  • ARP 12 Point Head Stud Kit Plate Honed with Block
  • Callies Magnum or Crower Enduro 4340 Internally Balanced Steel Crank
  • Wiseco Boostline I-Beam Steel 2000 HP Rods with ARP L19 Bolts
  • King “HP” Race Series Main and Rod Bearings
  • JE/Wiseco Gas Ported C-Skirt N2O Pro Series Nitrous Pistons
  • Tool Steel .220″ Wall Wrist Pins for Severe Duty Application
  • Total Seal 043/043/3.0 mm NOS TNT or Hell Fire Rings
  • Comp Cams BBC Journal Solid Roller .800″ 7/4 Swap Cam Shaft
  • Cloyes Billet True Roller with Torrington Bearing Timing Kit
  • Isky Red Zone EZ-Roll Max Solid Bushing Roller Lifters
  • ATI Internally Balanced Specific Honed to Fit SFI Damper
  • AFR 245cc NPP Fully CNC Ported Aluminum Heads
  • AFR 2.125 Intake and 1.6″ Exhaust 8mm Stainless Steel Severe Valves
  • Pac 1225 Roller Springs and 10° Titanium Retainers
  • SCE Copper Head Gaskets and Receiver Grooved Heads
  • Comp Cams or Trend 7/16″ x .165″ Taper Wall Severe Duty Push Rods
  • Jesel 1.6/1.6 Pro Series Shaft Rocker System
  • AwesomeEngines® CNC Logo Powder Coated Valve Covers
  • Moroso 8 qt. Pro Eliminator Aluminum Oil Pan and Oil Pump Kit
  • Nitrous Express RNC 700HP Plate System Kit
  • Edelbrock Super Victor 4150 CNC Match Ported Intake Manifold
  • Holley or QFT 950cfm NOS Race Prepped Carburetor
  • MSD Distributor, Crank Trigger, 8.5mm Wires, NGK Race Series Plugs
  • Completely Dyno Tested and Tuned; Free 48 Shipping (see below)

Available Upgrades

Moroso 3 Vane Vacuum Pump System and Pump Mounted Relief Valve, Billet 3 Bolt Mandrel, Lines, Billet Tank and All Hardware
+ $1075.00
Ultra SFI Flex-plate Internally Balanced in House Flex-Plate and ARP Bolt Kit
+ $ 125.00
New Max-2000 Series 2000Hp Power Glide with Roller Bearing Extension and All Top Shelf Internals 60 Day Warranty
+ $3875.00
New Pro Max-3000 Series 3000Hp Power Glide with Pro Mod Pump, NASA Ringless Shaft and 10 Clutch Direct Drum 1 year Warranty
+ $4275.00
10″ Custom N2O Torque Converter with Steel Stator Custom Pump and Turbine Built for 2000HP
+ $1475.00
Power Master XL Series Race Starter
+ $ 195.00

Dyno Tested and Tuned Using C23 VP Race Fuel • Vacuum Pump • HP Corrected to Sea Level

Free freight shipping does apply to this item shipped to the UPS terminal in the continental 48 states for your zip code given to ship. Any required insurance, residential, lift gate, or out of area charges, will apply for your area code where you choose this item to be shipped to for the terminal for your zip code area.

Comments are closed.