462ci 1300Hp NOS LS Race Engine

462ci 1300Hp NOS LS Race Engine


4.155″ Bore | 4.250″ Stroke | 6.125″ Rods | 1150lb @ 5000 rpm 1300Hp @ 7000 rpm w/500Hp-Kit


  • LS NEXT IRON GEN III Cast Steel Billet Splayed Cap Race Block
  • Fully Dead On CNC Race Prepped to Perfection Specifications
  • Brass or Stainless Steel Freeze Plugs Installed
  • ARP Pro Series 12 Point Head Stud Kit Plate Honed with Block
  • Callies Magnum 4340 Internally Balanced 4.25″ Crank Shaft 58X
  • Callies Ultra H Beam 6.125″ Stroker Steel Rods with L19 Bolts
  • King HP Race Series Main, Rod and Cam Bearings
  • JE or Wiseco Forged NOS Forged Pistons and .200″ Wall Wrist Pins
  • Total Seal TNT or Hell Fire 043/043/3.0mm Racing Ring Set
  • Comp Cams or Erson .825″ Lift Steel Billet 55mm Solid Roller Cam
  • Steel Billet True Roller Adjustable Timing Chain Kit
  • LS New Timing Cover and Billet TDC Pointer
  • Comp Cams HIPPO NBO Bushed Solid Roller Lifters
  • ATI SFI Approved Internally Balanced Damper Specific Honed to Fit
  • GM LSXDR 11° Fully CNC Ported Heads
  • GM 2.280 Intake and 1.620 Exhaust Stainless Steel Valves
  • Pac Roller Springs, Titanium Retainers and 10° Locks
  • Cometic MLS Head Gaskets and Fel Pro Intake Manifold Gaskets
  • Trend 7/16 Double .165″ Taper Wall Push Rod Set
  • Jesel or T&D Shaft Mounted Rocker Arm Kit 1.8
  • AwesomeEngines® Sheet Metal CNC Engraved Valve Covers
  • LS Oil Pump and Pickup Complete Kit
  • Moroso 7 Qt. Oil Pan and GM Rear Cover
  • GM LSX-DR Match Ported 4500 Intake Manifold
  • NX RNC 63870-10 250-750Hp Plate System
  • QFT 1050 NOS Carb, #6 Fittings and Stud Kit
  • MSD 19355418 Control Box, Coils and NGK Plugs
  • Completely Dyno Tested and Tuned Racing Engine

Available Upgrades

Dart 31947211 LS NEXT Gen III Aluminum Blocks
+ $3995.00
Callies AWO31TXL 4340 Magnum USA 58X Light Weight Internally Balanced with Heavy Metal Included Crank Shaft
+ $ 695.00
Dart 9-34640006125-8 Steel Billet Crank
+ Call
Callies Ultra I Beam Steel Rods with L19 Bolts
+ $595.00
Tool Steel Ring Package for Power Adders and HP over 1500
+ $ 195.00
.220″ Wall Tool Steel Wrist Pins for Power Adders and HP over 1500
+ $ 195.00
Dart 368cc 10° Fully CNC Ported Heads with 2.300/1.600 Titanium Int/Exh Valves and CFE Sheet Metal Intake Manifold 950Hp
+ $4975.00
NX Fogger System Installed up to 700HP
+ $1599.00
Jesel Front Belt Drive System with Front Drive Distributor
+ $1695.00
Moroso 3 Vane Complete Vacuum Pump System Installed and Dyno Tuned with Engine
+ $ 995.00
ATI Super Dampener with Crank Trigger Magnets Specific Honed to Fit the Crank Snout Used
+ $ 195.00

Dyno Tested and Tuned with C12 Race Fuel • Vacuum Pump • HP Corrected to Sea Level

Free freight applies to this item shipped to the closest UPS Terminal for your Zip Code in the continental 48 states. Handling fees, added insurance, residential, lift gate service, out of area fees if any, may apply for your destination where you have this item shipped to. Any extra cost of any of these charges will be known to you before we ship

Comments are closed.