468ci 600Hp Pontiac Bracket Race Engine

468ci 600HP Pontiac Bracket Race Engine

Fully CNC Race Prepped Dead On Reconditioned Pontiac Block, Bored .030, 040 or .060 Over. Internally Balanced New 4.250 4340 Steel Stroker Crank, H Beam Rods and Forged High Compression 13:1 Pistons. Edelbrock D Port Aluminum Cylinder Heads and Solid Roller Comp Cams Cam and Lifters



  • Pontiac CNC Race Prepped Bored Block
  • ARP Head and Main Stud Kit for Block and Head Combination
  • Stainless Steel or Brass Freeze Plug Kit Installed
  • Eagle or Scat 4.250″ 4340 Internally Balanced Crank
  • Eagle or Scat 6.800″ H-Beam 4340 Steel Rods
  • King or Clevite Main and Rod Bearings Installed
  • Mahle, JE or Wiseco 13:1 Forged Pistons
  • Total Seal Plasma Moly High Performance Rings
  • Comp Cams Solid Roller Cam Shaft
  • Double Roller Steel Billet Timing Kit
  • New Aluminum Timing Cover
  • Comp Cams Solid Roller Lifters
  • ATI SFI Approved Super Dampener Internally Balanced
  • Edelbrock D Port Aluminum Heads
  • New 2.110″ Intake and 1.770″ Exhaust Stainless Steel Valves
  • New 1.55″ Roller Springs and 10° Retainers and Locks
  • Complete Fel Pro Hi-Performance Engine Gasket Kit
  • Manley .120″ Thick Wall Racing Push Rods
  • Comp Cams Magnum Series 1.6 Roller Rocker Arms
  • M54D Oil Pump and Proper Pickup Tube
  • Moroso Stroker 7qt. Race Oil Pan
  • Tall Black Steel or Aluminum Racing Valve Covers
  • Edelbrock Victor Series Intake Manifold
  • 950 cfm QFT or Holley Ultra Series Dyno Tested and Tuned Carburetor
  • MSD Pro Billet Racing Distributor, Wires and NGK Plugs
  • Dyno Tested and Tuned

Available Upgrades

¾ Fill Hard Block for Better Cylinder Wall Support
+ $ 249.00
Steel Billet 4 Bolt Main Center 3 Caps Installed
+ $ 995.00
MR1 Iron Block with Steel Billet Splayed 3 Center 4 Bolt Cap Fully Race Prepped Block (best upgrade you can buy)
+ $2799.00
Eagle, K1 or Scat 4.500″ Internally Balanced 4340 Steel Crankshaft
+ $ 499.00
Titanium Valve Spring Retainers
+ $ 199.00
SFI Heavy Duty Flex-plate with ARP Bolts
+ $ 129.00
ATI SFI Heavy Duty Flex-plate with ARP Bolts
+ $ 249.00
T&D Shaft Rocker System Installed (from)
+ $1199.00
Edelbrock Stage 1 Ported Intake Manifold
+ $ 399.00
Edelbrock Aluminum Cylinder Heads Fully CNC Ported and 650Hp
+ $1499.00
MSD 6AL Digital Box Dyno Tested and Tuned for a Real Drop in and Go Engine
+ $ 499.00

Dyno Tested and Tuned with 110° Race Gas • HP corrected to Sea Level

Free freight does not apply to this item. We will ship to a UPS freight terminal for your address in the normal 48 states up to $400. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges over the $400, if any, will be known to you before we ship.

Comments are closed.