468ci 800Hp Small Block Ford Magnum Engine

468ci 800Hp Small Block Ford Magnum Engine

$22,475.00

Deck 9.5″ | Bore 4.185″ | Stroke 4.25″/2.75″M | Rod 6.25″ | 800Hp @ 7200 rpm

Components

  • Dart Steel Billet Splayed Cap 4 Axis CNC Race Prepped Block
  • ARP Head Stud Kit Plate Honed Specifically with the Dart Block
  • Brass or Stainless Steel Freeze Plugs For Life Time Service
  • Callies Magnum 4340 Internally Balanced Steel Crank
  • Callies Ultra I Beam Steel Rods with L19 Bolts
  • King HP Race Series Main and Rod Bearings
  • Diamond, JE or Wiseco 14.5:1 Forged Race Pistons (8 to 13:1 available)
  • Total Seal TNT or Hell Fire .043/.043/3.0mm Rings
  • Comp Cams .800″ Lift Steel Billet Roller Cam
  • Cloyes Billet True Roller Timing Set
  • New Aluminum Timing Cover and TDC Verified Billet Pointer
  • Isky Red Zone NBO Bushed Severe Duty Roller Lifters
  • ATI Internally Balanced Super Damper Specific Honed
  • Brodix Head Hunter 15° cc Fully CNC Ported Heads 413/247 Flow @.800
  • Brodix 2.180/1.600 Stainless Steel Valves
  • Pac Racing Roller Springs with Tool Steel or Titanium Retainers
  • Fel Pro 1134 MLS Severe Duty Racing Head Gaskets
  • Manley or Trend 3/8″ x .135 Wall Severe Duty Push Rods
  • Jesel or T&D Pro Series Shaft Rocker System
  • AwesomeEngines® Powder Coated CNC Engraved Logo Valve Covers
  • AwesomeEngines® Moroso 8qt. Drag Race Specific Chassis Oil Pan
  • AwesomeEngines® Melling 83HV Oil Pump and Pick Up
  • Edelbrock 2828 Super Victor CNC Match Ported Intake Manifold
  • Holley Ultra or QFT Black Diamond 1050CFM Carburetor and Jomar Spacer
  • MSD Distributor, Crank Trigger, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight)

Available Upgrades

Dart Aluminum Race Block #31345295-9.2″ or #31345235-9.5″ with Upgraded Special ARP Head Stud Kit Included
+ $4195.00
Callies Ultra Billet Pro Series 4340 Internally Balanced Crank (heavy metal not required)
+ $1275.00
Bill Miller or GRP Billet Aluminum Rods (machining for extra clearance is included)
+ $ 275.00
Tool Steel .200″ Wall Wrist Pins
+ $ 1955.00
Moroso Aluminum Pro Eliminator Kick Out Style Oil Pan
+ $ 475.00
Jesel Belt Drive System Installed
+ $1275.00
NX 300Hp Plate System, .200″ Wall Wrist Pins, Rings Gapped for NOS
+ $ 875.00
Moroso Complete Vacuum Pump System Installed
+ $ 1075.00
Holley EFI System Installed, Dyno Tested and Tuned
+ $1695.00

Dyno Tested and Tuned with 112 Racing Fuel • Vacuum Pump • Crank Trigger • HP corrected to Sea Level

Free freight applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges if any will be known to you before we ship.

Comments are closed.