468ci SBC Bullet Short Block

468ci Small Block Chevy Bullet Short Block

$6950.00

Dart 9.325″ Tall Deck x 4.185″ Bore Iron Eagle Steel Billet Splayed Cap BBC Raised .390″ Cam Race Block • 4-Axis Fully CNC Machined Race Prepped • Cam Bearings, Brass or Stainless Steel Freeze Plugs • Professionally Assembled with Rotator Listed Below

 

Callies Magnum 4.250″ Internally Balanced Steel Crank ­• K1 or Manley 6.125″ H-Beam Rods with ARP 2000 Bolts • JE or Wiseco 23, 18 or 15° –  8 to 15:1 Pro Series Pistons are Available • Total Seal Moly Ring Set • Clevite or King HP Race Bearings

 

Available Upgrades

Short Block Upgrades Available

Dart or Brodix Aluminum Block Fully Race Prepped
+ $3495.00
.903 Lifter Bore
+ $ 250.00
Total Seal Stainless Steel, TNT or Hell Fire Power Adder Ring Set
+ $ 195.00
Trend or Precision Tool Steel Severe Duty .200″ wall Wrist Pin Upgrade new lower pricing (may require heavy metal)
+ $ 195.00
Comp Cams HIPPO Pin Oiling Solid Roller Lifters
+ $ 195.00
Comp Cams HIPPO Pin Oiling Bushing Style Roller Lifters
+ $ 995.00
Isky Red Zone HIPPO Solid Roller Lifters with No Needle Bearings(from)
+ $1295.00
ATI Super Damper Specific Fit Honed to Your Crank (double key way available $100)
+ $ 395.00
Fel Pro MLS Head Gaskets for Superior Head Gasket Seal (pair)
+ $ 195.00
SFI Ultra Flex plate Internally Balanced in House w/ ARP 12 Point Bolts
+ $ 125.00
Power Master Heavy Duty Starter
+ $ 195.00
ARP Head Stud Kit Used For Plate Honing Your Block (from)
+ $ 175.00
Moroso 21171 Billet Aluminum Oil Pump
+ $ 275.00
Moroso Steel Kick Out Eliminator Series Oil Pan
+ $ 395.00
Moroso Pro Eliminator Aluminum Kick Out Series Oil Pan
+ $ 595.00

Crank Shaft and Connecting Rod Upgrades Available

Callies Magnum Series USA No Drill Internally Balanced Crank Shaft with Dual Key Way Installed for Pro Charger or Blower Applications
+ $   95.00
Callies XL 44lb No Drill Internally Balanced Light Weight 4340 Pro Series Crank Shaft ( no heavy metal required )
+ $895.00
Oliver Steel I Beam Rods with L19 Rod Bolts
+ $ 995.00
Callies Ultra I Beam 4330V Steel Rods with L19 Bolts
+ $1295.00
Heavy Metal Installation if Needed with Big Wrist Pin Option (per slug)
+ $ 75.00

Cam, Deluxe Short Block Kits and N2O Upgrades

Camshaft Kit Installed with Solid Polished Aluminum Timing Cover
+ $ 695.00
Deluxe Short Block Kit Below with 7-4 Swap Steel Billet Cam, ATI Super Damper, Pro Eliminator Steel Oil Pan and Pump Package
+ $1695.00
Nitrous Short Block Upgrade .200 Wall Tool Steel Pins/ Oring Block and Wire, File Fit Rings For Nitrous
+ $ 395.00

Cam Shaft Kit

  1. Cloyes Billet True Roller Timing Kit with Torrington Roller Bearing
  2. Solid Polished Aluminum None Flexible Timing cover Kit
  3. Degree Camshaft and Professionally Install Kit Parts
  4. Comp Cams Camshaft Button and Set End Play
  5. Comp Cams Lock Kit Installed Nice and Neat

Deluxe Short Block Kit

  1. Above Cam Shaft Kit (your choice!)
  2. AwesomeEngines® Billet Timing Pointer
  3. ATI Super Damper is now Standard in Deluxe Kit
  4. Moroso Oil Pump and Tig Welded Pick Up Tube Install Kit
  5. Moroso 7 Quart Pro Kick Out Drag Race Stroker Oil Pan Installed
  6. Timing Cover, Front Seal and One Piece Rubber Stroker Oil Pan Gaskets
  7. Oil Filter Installed, 7 Quarts of Racing Oil, Oil Pressure Checked and System Primed

NOS Short Block Package

  1. Total Seal Stainless Steel, TNT or Hell Fire Power Adder Rings
  2. .200″ Wall 1500 Hp Tool Steel Severe Duty Wrist Pins
  3. Oring Block with Stainless Steel Wire

Complete Internally Balanced Short Blocks Come with Blue Print and Balance Sheet as well as all Product Information, Stickers and Contingency Information

Free freight applies to this item shipped to a commercial address in the 48 states up to a $300 total charge. Anything over $300 total shipping, handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges, if any, will be known to you before we ship if required.

 

Comments are closed.