473ci 875HP SBC PRO MAGNUM RACE ENGINE

473ci 875HP SBC Pro Magnum Race Engine

473ci Monster Mouse SBC Race Engine with the very best internals available. As well, the Dart Iron Eagle block, 296cc 12.5° Heads and Intake and  proven power making assembled race engine. Best in the business SBC Racing Engine you can get.

$22,499.00

9.325″ Deck | 4.185″ Bore | 4.3″ Stroke | 6.200″ Rods | 875Hp @ 7600 rpm

Component

  • Dart Iron Eagle .390″ Raised BBC Cam Fully CNC Machined Block
  • Brass or Stainless Steel Freeze Plug Kit Installed
  • ARP 12 Point Specific Fit Head Stud Kit Plate Honed with Block
  • Callies Magnum 4340 Internally Balanced Crank
  • Callies Ultra, Crower or Oliver Steel I-Beam Steel Rods with L19 Bolts
  • Clevite or King HP Series Main and Rod Bearings
  • JE / Wiseco 15:1 Gas Ported Coated Skirt Light Weight Forged Pistons
  • JE / Wiseco Tool Steel .200″ Wall Wrist Pins
  • Total Seal TNT or Hell Fire 043-043-3mm Low Tension Rings
  • Comp Cams .850″ Steel Billet 7/4 Swap Roller Cam
  • Jesel Belt Drive System Installed
  • Isky EZ Max HIPPO Bushed No Needle Bearing Roller Lifters
  • ATI Super Damper Specific Honed to Fit and Billet TDC Pointer
  • Dart #14482030 12.5° 296cc Fully CNC Ported Aluminum Heads
  • Dart 2.180″ Intake. and 1.600″ Exh. Stainless Steel Valves
  • Manley 221420 1.5″ Lightweight Springs, 7° 23677 TI-17 Retainers
  • Cometic or Fel Pro MLS Severe Duty Head Gaskets
  • Manley or Trend 7/16 x .165″ Wall Severe Duty Push Rods
  • Jesel Pro Series One Piece Shaft Rocker System Installed
  • AwesomeEngines® CNC Engraved Sheet Metal Covers
  • Moroso 22171 Billet Oil Pump with Integral Screen
  • Moroso Aluminum Pro Eliminator Side Kick Out Oil Pan
  • Dart Fully Ported Intake Manifold and Jomar CNC Ported Spacer
  • QFT 1050cfm FX 4150 Series Carburetor, Fuel Fittings and Studs
  • MSD Distributor, Crank Trigger, Wires and NGK Plugs
  • Free 48 State Freight

Available Upgrades

Dart #31712232 Race Series Aluminum Block Fully CNC Race Prepped
+ $3995.00
Callies XL 46lb Magnum Series 4340 Internally Balanced Light Weight Crank and Heavy Metal Included 10+hp
+ $1295.00
Jesel Front Mounted Distributor and Oil Pump Plug Kit Installed for Optimum Timing Stability
+ $ 695.00
Titanium Intake Valves Installed
+ $ 895.00
Moroso Vacuum Pump System with New Pump Mounted Relief Valve and Billet Light Weight Mandrel
+ $ 975.00
Nitrous Express Shark 200-600Hp System Installed
+ $1495.00
Ron’s Terminator Fuel Injection Installed and Dyno Tuned for another 20+Hp
+ $1995.00

Dyno T&T with 116 Race Fuel • Vacuum Pump • XL Crank • HP Corrected to Sea Level

Comments are closed.