495ci 990 Hp SBC Magnum Race Engine

495ci 990 Hp SBC Magnum Race Engine

AwesomeEngines® was the 1st to build this engine 20 years ago with 4.400 Bore Spacing, Injected 1140Hp Fully Loaded NA doing them. Very best Internals, Brodix Aluminum Block, CFE SBX Heads and Sheet Metal Intake are a Perfectly Matched Combination for this SBC Race Engine that Matches most BBC Engines in Power and is 150lbs Lighter than. New Pricing 20% now included as of 05-01-2023

$39,995.00

9.500″ Deck | 4.185″ Bore | 4.500″ Stroke | 6.300 Rods | 1040 HP @ 7800 rpm

Components

  • Brodix Hipped Raised Cam 100% CNC Prepped Aluminum Race Block
  • ARP Specific Aluminum Head Stud Kit Plate Honed with Block
  • Callies Steel Billet 4330VM No Drill Internally Balanced Crank
  • Callies Ultra I Beam Rods and L19 Rod Bolts
  • Clevite or King “HP” Series Coated Main and Rod Bearings
  • JE or Wiseco 15:1 2618 Forged Pistons
  • JE Tool Steel .220″ Thick Wall Wrist Pins
  • JE HNS Hardened Nitrous Series 027-027-2.0 mm Fit Rings
  • Comp Cams  or Bullet Steel Billet LSFO Swap Roller Cam
  • Cloyes Z Chain Raised Cam Billet Timing Set
  • Isky Red Zone EZ Max Bushed .904″ HIPPO Roller Lifters
  • ATI Super Damper Specific Honed to Crank
  • AwesomeEngines® Billet TDC Pointer
  • CFE SBX 11° CNC Ported Killer Flowing Heads
  • 2.200″ Intake w/1.580″ Exhaust Titanium Valves
  • Manley 221456 Lightweight Springs and T-Retainers
  • Cometic or Fel Pro MLS Head Gaskets
  • Manton or Trend 7/16 x .165″ Taper-wall Push Rods
  • Jesel or T&D Professional Series Shaft Rocker System
  • AwesomeEngines® CNC Engraved V-Covers
  • Moroso External Oil Pump Front Mandrel Drive
  • Moroso Aluminum Pro Eliminator Oil Pan
  • CFE Sheet Metal 1X4 Intake Manifold
  • Holley or QFT 1150 cfm Carburetor and Spacer Package
  • MSD Distributor, Crank Trigger, 8.5 mm Wires, NGK Plugs
  • AwesomeEngines® Free 48 State Freight

Upgrades

Sheet Metal 2×4 Intake, Spacers, 2×4 Carbs, Linkage 1080Hp Dyno Tested
+ $3000.00
Moroso Vacuum Pump System, Pump Mounted Relief Valve and Billet Light Weight Mandrel (dyno tested)
+ $1400.00
Moroso 5 Stage Dry Sump System Complete (vacuum pump not needed)
+ $3000.00
Holley Terminator EFI System
+ $1500.00
Ron’s Terminator Alky Fuel Injection Installed and Dyno Tuned
+ $2500.00

Dyno Tested & Tuned with C16 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Free Freight Applies to Engine Shipped to a Commercial Address or Terminal Closest to Your Zip Code for Pickup 48 States

Comments are closed.

Skip to toolbar