510ci 1650 Hp SBC 4.5 BS Nitrous Race Engine

510ci 1650 Hp SBC 4.5″ BS Nitrous Race Engine

$38,975.00

4.500″ Bore Space | 9.625″ Deck | 4.250″ Bore | 4.500″ Stroke | 6.350″ Rods | 1650HP @ 7000 RPM w/1 Stage N2O

Components

  • Brodix 8B1200C Raised Cam Block 100% CNC Race Prepped
  • MLS Race Prepare Deck or O-RING Block with Stainless Steel Wire
  • ARP Pro Series Head Stud Kit Plate Honed with Block
  • CALLIES 4340 Steel Billet Internally Balanced ND Crank
  • CALLIES Ultra I Beam Rods with L19 Rod Bolts
  • CLEVITE or KING HP Race Coated Main and Rod Bearings
  • JE or WISECO Gas Ported Anodized Nitrous Pistons
  • PRECISION or Trend .240″ Wall Tool Steel Wrist Pins
  • TOTAL SEAL Tool Steel Top .043/.043/3.0 mm Rings
  • COMPETITION CAMS 7/4 Swap Steel Billet N2O Roller Cam
  • ISKY EXTREME ZONE™ .903″ EZ-RollMAX™ Roller Lifters
  • Jesel Belt Drive and Front Mounted Distributor
  • ATI Impregnated Crank Trigger Super Damper Specific Honed
  • DART 9° Fully CNC Ported Heads
  • TITANIUM 2.200 Intake and Enconel 1.600″ Exhaust Valves
  • PAC RACING Springs and Titanium Retainers
  • MLS or Receiver Groove Heads for SCE Copper Head Gaskets
  • TREND 1/2″ x .200″ Taper Wall Push Rods
  • JESEL Pro Series Shaft Rocker System
  • Awesome Engines® CNC Engraved Logo Valve Covers
  • MOROSO External Billet Oil Pump and 4 Vane Vacuum Pump Kit
  • MOROSO Aluminum Pro Eliminator Oil Pan
  • DART 42811200 100% Ported Intake and Spacer Kit
  • NX RNC 750Hp Plate System
  • HOLLEY ULTRA or QFT FX 1050 NOS Carburetor and Spacer
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Race Block w/.937″ Key-Way Bushed Lifters
$1975.00
510ci CFE or Dart Billet CNC Machined 4.5″ Race Block w/.937″ Key-Way Bushed Lifters and Big Raised Cam
$8975.00
BRODIX 12° Symmetrical Port WP BD 4510 Fully CNC Ported Heads with Titanium Intake Valves and Hughes Sheet Metal Intake
+ 2975.00
CFE Billet 4.500 Bore Spacing SBX Symmetrical Port 11° Cylinder Heads, Sheet Metal 1×4 or 2×4 (2×4 add total $7490)
$5975.00
GRP Billet Aluminum Connecting Rods (must have CFE or Dart billet big raised cam block only)
+ $295.00
Moroso 5 Stage Dry Sump System Installed Completely (no need for an air pump)
+ $2475.00
NX 2nd Stage Direct Injection System Now Capable of 1300 HP of Power Adder
+ $1775.00
Rons Terminator or Twin 2×4 Methanol Injection Set up for NOS
+ $1475.00

Dyno Tested and Tuned Using C23 • HP Corrected to Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight Applies To This Item Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States. Residential, Out-Of-Area, Lift Gate Service, Extra Insurance, Special Handling May Apply And Are Subject To Additional Charges

Comments are closed.