535ci 700HP RB Mopar Pro Street Crate Engine

535ci 700Hp RB Mopar Pro Street Crate Engine

An Affordable Big Block Mopar Pro Street Pump Gas Engine with a Ton of Torque and HP

$13,495.00

Bore 4.350″ | Stroke 4.500″ | Rod 7.100″ | 700lbs @ 4600 rpm – Hp 700 Hp@ 6000 rpm

Components

  • Blue Printed CNC Race Prepped Studded Main 440 Block
  • TFS 92025 Pro Series Head Bolt Kit Plate Honed with Block
  • Stainless Steel Freeze Plugs For Lifetime Service
  • K1, Eagle or Scat 4340 Internally Balanced Steel Crank
  • K1 Eagle or Scat 4340 H-Beam Fully Floated Rods with ARP Bolts
  • King “HP” Series Main and Rod Bearings
  • Mahle, JE or Wiseco 10.95:1 Forged 2618 Pistons
  • Total Seal File to Fit Race Series Plasma Moly Rings
  • Comp Cams or Erson .700 Lift Solid Roller Cam
  • Erson Hydraulic Pro Street Solid Roller Lifters
  • Double Roller Billet Timing Set with Torrington Bearing/Bushing
  • Milodon 65650 Black Timing Cover Kit with 65660 TDC Pointer
  • NON SFI 163383 Street Internally Balanced Damper
  • TFS PowerPort® TFS61617802C00 Fully CNC Ported Heads
  • TFS 2.19/1.76 Stainless Steel Valves
  • Manley Nex Tek Solid Roller Valve Spring and Retainer Kit
  • Fel Pro High Performance Head Gaskets
  • Manley 3/8 x .135″ Thick Wall Push Rods
  • Harland Sharp S70015K shaft Rocker System Installed
  • Mopar Performance Valve Covers
  • Melling High Pressure Oil Pump Kit and Milodon 21500 Drive
  • Milodon 31010 7qt. Oil Pan and Pick Up Tube Kit Installed
  • Edelbrock Victor Series Intake Manifold and 7798 Valley Pan
  • QFT-Q-1050cfm 4150 Carburetor
  • Pro Billet MSD Distributor, 8.5mm Plug Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

Mopar Steel Race Block w/4.500″ Plate Honed Bores for a Rock Solid New 572ci Stroker Engine when Steel Race Blocks are Available
+ $3495.00
Indy Aluminum Race Block with 4.500 Plate Honed Bores for a Rock Solid New Lightweight 572ci Stroker Engine whenever You want one
+ $4995.00
Any Compression Ratio is Available
+ $  295.00
Edelbrock Victor Fully CNC Ported Cylinder Heads with 2.25 Intake Valves
+ $  995.00
Hydraulic Roller Cam and Lifter Kit
+ $  195.00
Jesel or T&D Pro Series Shaft Rocker System Installed
+ $  995.00
Titanium Retainer Kit for Hydraulic or Solid Roller Valve Springs
+ $  255.00
Manley or Trend .165″ Taper Wall 7/16″ Push Rods (will require clearance of the heads)
+ $  395.00
TFS-61604304 Pro Series Head Stud Kit
+ $  100.00
SFI 18:1 Steel 6.610″ C4279 Dampener
+ $   50.00
ATI SFI 18:1 Steel 917122E  7.074″ SFI Super Dampener Specific Honed to Fit Crank Snout (must be done per ATI)
+ $  395.00
Quick Fuel Technology 1150 cfm FX 4500 Series Carburetor and Special Moroso 4150/4500 Adapter
+ $   695.00
Moroso Vacuum Pump Complete System Installed
+ $1095.00
Meziere WP114 Electric Water Pump Kit Installed
+ $  395.00
Complete 50-513 (1250hp) Sniper Complete with 160 Pump Fuel Injection System Installed, Dyno Tested and Tuned (Silver or Gold Color is Available)
+ $1295.00

Dyno T&T with Exxon 93° Pump Gas • Vacuum Pump • HP corrected to Sea Level

Comments are closed.