555ci 750HP RB Mopar Pro Street Engine

555ci Big Block Mopar 750Hp Pro Street Crate Engine

An Affordable Big Block Mopar Pro Street Pump Gas Engine with a Ton of Torque and HP

$11,999.00

Bore 4.350″ | Stroke 4.675″ | Rod 7.100″ | 755lbs @ 4400 rpm – Hp 750 @ 6000 rpm

Components

  • AwesomeEngines® Recon Race Prepped RB Block
  • Pro Series Head Stud Kit Plate Honed w/Block
  • Stainless Steel Freeze Plugs For Lifetime Service
  • K1 Pro Series 4340 Int/Bal Steel Crank
  • 4340 H-Beam Rods w/ARP Bolts Bushed and Pin Oiled Pin
  • Clevite or King “HP” Series Main and Rod Bearings
  • Wiseco 10.5:1-2618 or Mahle 4032 Forged Pistons (8-14:1 ava)
  • Total Seal Plasma Moly File to Perfect End Gap Rings
  • Comp Cams .600″ Pro Street Solid Roller Cam
  • Comp Cams HIPPO Severe Duty Roller Lifters
  • Cloyes 3 Piece Timing Set w/Indexable Cam Timing
  • Chrome Timing Cover and TDC Pointer
  • AwesomeEngines® SFI Approved Internally Balanced Damper
  • Direct Motion Fully CNC Ported 325/78cc Aluminum Heads
  • Manley 2.250/1.880 Stainless Steel Pro Series Valves
  • Manley 1.640″ Nex Tek Springs and Titanium Retainers
  • Fel Pro #1009 Pre Flattened Steel Wire Head Gaskets
  • Manley or Trend .120″ x 3/8″ Thick Wall Push Rods
  • AR-Pro Series Stainless Steel Shaft Rocker System Installed
  • AwesomeEngines® CNC Engraved Powder Coated V/C
  • Melling M63V High Volume High Pressure Oil Pump Kit
  • AwesomeEngines® Moroso Oil Pan w/Proper Pick Up Tube
  • Victor Style Match Ported Intake w/Special Heat Sink Spacer
  • AwesomeEngines® Dyno Tuned Billet 1000cfm 4150 Carburetor
  • MSD Distributor, 10.5mm Plug Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight, see race news/engine warranty)

Available Upgrades

P5153944 Mopar Race Block w/4.350 Plate Honed Bores for a Rock Solid New 555.8 ci Stroker Engine
+ $2495.00
P5153860 Mopar Steel Race Block w/4.500 Plate Honed Bores for a Rock Solid New 595ci Stroker Engine
+ $2695.00
Edelbrock Victor Fully CNC Ported Cylinder Heads and Ported Intake Manifold (+25 hp)
+ $1495.00
Harland Sharp or T&D Shaft Rocker System Installed
+ $1195.00
Manley .165″ Wall 7/16″ Push Rods
+ $ 255.00
Quick Fuel Technology 1050 cfm FX Series Carburetor (10-15 more hp)
+ $ 695.00
Moroso Vacuum Pump Complete System Installed
+ $ 995.00
Meziere WP114 Electric Water Pump Kit Installed
+ $ 395.00
ATI SFI Super Damper Installed and Honed to Fit
+ $ 295.00

Dyno T&T w/Exxon 93° • Vacuum Pump • HP corrected to Sea Level

Comments are closed.