565CI 1030HP BBC Bullet Race Engine

565ci 1030Hp BBC Bullet Race Engine


9.78″ Deck | 4.6″ Bore | 4.25″ Stroke | 6.385″ Rods | 1030 Hp @ 7400 rpm 800 lbs @ 6000 rpm


  • Dart Big M or World Merlin IV 4 Axis CNC Race Prepped Block
  • ARP 12 Point Head and Inner Valley Stud Kit Plate Honed with Block
  • Stainless Steel or Brass Lifetime Freeze Plug Kit Installed
  • Dart or Manley 4340 Internally Balanced Fully Counterweighted Crank
  • K1 or Manley Steel H-Beam Rods with ARP 2000 Bolts
  • King “H” Race Series Main and Rod Bearings
  • Wiseco 15:1 Quick 16 Pro Series Gas Ported Coated Skirt Pistons
  • JE Wiseco .180″ Thick Wall Steel Pins
  • Total Seal TNT or Hell Fire Low Tension Ring Set
  • Comp Cams .850″ 7/4 Swap Steel Billet Roller Camshaft
  • Comp Cams HIPPO Severe Duty Solid Roller Lifters
  • Cloyes Billet True Roller Timing Set with Torrington Bearing
  • Polished Aluminum Front Timing Cover
  • ATI Super Damper Specific Honed to Fit and Billet TDC Pointer
  • ProFiler 174X 375cc Fully CNC Heads; 460/325 Flow @ .800 Lift
  • ProFiler 2.35″ x 1.85″ Stainless Steel Valves
  • Manley or PAC 1330 1.500″ OD Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Multi-Layered Head Gaskets
  • Trend Taper-Wall 7/16 x .165″ Wall Severe Duty Push Rods
  • Jesel or T&D Pro Series Shaft Rocker System
  • AwesomeEngines® CNC Engraved Powder Coated Logo Valve Covers
  • Moroso #22185 Billet Oil Pump and Tig Welded Pick Up Kit
  • Moroso Pro Eliminator #21049 Kick Out Oil Pan
  • ProFiler CNC Match Ported 4500 Intake Manifold
  • Special Jomar Heat Sink CNC Ported Spacer
  • QFT 1150 cfm FX Race Series Carburetor
  • MSD 84697 Big Cap Distributor, Wires and NGK Spark Plugs
  • Power Master Ultra Series Starter, SFI Flexplate and ARP Bolt Kit

Available Upgrades

World Merlin IV Steel Billet Splayed Cap 55mm Cam and .904″ Lifter Racing Block
+$ 695.00
Dart Big M Pro with 54mm Raised Cam, 904″ Lifters, Steel Billet Cap, Wide Oil Pan Racing Block +15hp
+ $ 995.00
Brodix or Dart Aluminum Block and ARP Special Head Stud Kit
+ 3995.00
Callies Magnum or Crower Enduro 4340 USA Center Counter Weight Internally Balanced Crank and Heavy Metal Included in the Price
+ $1295.00
Callies XL Light Weight 4340 USA Center Counter Weight Internally Balanced Crank and Heavy Metal Included in the Price
+ $1895.00
Oliver Steel I Beam Max Series Rods and L19 Bolts
+ $ 995.00
Callies Ultra Series I Beam Rods and L19 Bolts
+ $1195.00
Comp Cams Needless Bushed Roller Lifters (these are the new era of roller lifters)
+ $ 395.00
Isky EZ MAX 37296LO180 Bushed Roller Lifters (best in the business)
+ $ 795.00
Jesel Belt Drive Installed (standard cam height block only)
+ $ 995.00
Titanium 2.350″ Intake Valves
+ $ 795.00
Jesel or T&D Shaft Rocker Roller Tip Option
+ $ 325.00
Moroso #22163 Billet Gerotor Oil Pump
+ $ 175.00
Moroso Pro Eliminator #20385 Oil Pan Installed
+ $295.00
MSD Crank Trigger Kit Installed, Dyno Tested and Tuned
+ $ 275.00
Holley Sniper Stealth EFI 550-842 EFI up to 1500 NA Hp, 12-848 Fuel Pressure Regulator, 526-2 EFI Fuel Pump Kit Dyno Tested and Tuned
+ $1945.00
Moroso Vacuum Pump, Pump Mounted Relief Valve, 3 Bolt Mandrel, Hoses, AN Fittings, Brackets, Pulley’s for a Complete Kit
+ $1075.00
Ron’s Terminator Injection System Installed for a Turn Key Dyno Tested Engine with 1040Hp
+ $1995.00

Dyno Tested and Tuned with 112 Fuel • Vacuum Pump • Corrected to Sea Level

Free freight of $500 applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges that exceed $500 will be known to you before we ship.

Comments are closed.