565ci 780HP BBC Marine Crate Engine

565ci 780Hp BBC Marine Crate Engine

Every Pro Street Marine Crate Engine, for Muscle Cars, Hot Rods, Pro Street applications are complete dyno tested ready units. Best in the business professionally machined on a 4 axis CNC Centroid 2013 block machining center for dead on tolerances

$16,999.00

9.785″ Deck | 4.600″ Bore | 4.250″ Stroke | 6.385″ Rods | 780 Hp @ 7000 rpm

Components

  • Dart Big M or Merlin III Splayed Cap CNC Race Prepped Block
  • Brass or Stainless Steel Lifetime Freeze Plugs Installed
  • Inner Valley Stud Kit and 12 Point Head Stud Kit
  • AR-K1, Eagle, Manley, Scat 4340 Forged Steel Crank Internally Balanced
  • AR-K1 Manley or Scat H-Beam Rods with ARP 2000 Bolts
  • King “HP” Race Series Main and Rod Bearings
  • JE or Wiseco 10.75:1 Pro Series Forged N2O Racing Pistons and 180 Pins
  • Total Seal SS or Hell Fire .043/.043/3 mm Racing Ring Set
  • Comp Cams or Erson 7/4 Swap Pro Street Solid Roller Cam
  • Comp Cams or Erson Hippo Pro Series Roller Lifters
  • Cloyes True Roller Billet Timing Set or Quiet Gear Drive (your choice)
  • Solid Polished Aluminum Timing Cover
  • Billet Aluminum TDC Pointer TDC Verified to the Damper
  • ATI SFI Internally Balanced Harmonic Damper
  • Brodix 351Oval Port Fully CNC Ported Aluminum Heads
  • Brodix 2.350/1.88 Stainless Steel Valves
  • Manley Nex Tek 1.64 Solid Roller Springs, Titanium 10° Retainers
  • Fel Pro 1077 Head Gaskets for N2O or Marine Applications
  • Manley 3/8 x .120″ Wall Severe Duty Push Rod Set
  • Comp Cams Pro Magnum Roller Rockers and Jomar Stud Girdle
  • AwesomeEngines® CNC Engraved Powder Coated Pro Series Valve Covers
  • Melling 77HV Oil Pump and Proper Moroso Pick Up Tube
  • Moroso 7qt. Hi-Performance Oil Pan; (marine available)
  • Brodix or Pro Filer Sniper II Series CNC Ported Intake Manifold
  • Jomar Phenolic Special CNC Ported 4 Hole Heat Sync Spacer
  • 1050cfm QFT 4500 Pro Street Carburetor (dyno tuned)
  • MSD Billet Dist, 8.5mm Wires and NGK Plugs (dyno tuned)
  • free 48 freight to continental USA

Any Upgrade or Option not Listed is Available (call)

Dart or Brodix Aluminum Light Weight Block Fully CNC Race Prepped to Specifications and Special Head Stud Kit
+ $3995.00
Callies Magnum Forged 4340 USA Steel Crank Shaft Internally Balanced (not making the dragon slayer any longer)
+ $1495.00
Callies H Beam Ultra Series Steel Rods with ARP L19 Bolts
+ $ 599.00
Dart Iron Eagle Fully CNC Ported Steel Heads with 2.3/1.88 Stainless Steel Valves (when steel heads required)
– $ 499.00
Jesel or T&D Pro Series 1 Piece Intake Bar Shaft Rockers, Triple Spring, Econel Exhaust Valves
+ $1795.00
World Marine Intake Manifold with Bronze Water Protective Inserts When Needed
+ $ 295.00
Hydraulic DRST Racing Hydraulic Roller Lifters
+ $ 295.00
Erson Rev Zone Bushed Solid Roller Lifters
+ $ 495.00
Jesel or T&D Pro Series 1 Piece Intake Bar Shaft Rocker System Installed
+ $1395.00
Trend Taperwall 7/16 Push Rods Installed for Maximum Valve Train Stability (must have shaft rockers)
+ $ 395.00
Total Seal Stainless Steel, TNT or Hell Fire Rings (marine or nitrous power adder over 1000hp these gaskets are required)
+ $ 150.00
ATI SFI Super Damper Specific Honed to Crank Installed
+ $ 375.00
Fel Pro #10771 MLS Marine or N2O Head Gaskets (marine or nitrous power adder over 1000hp these gaskets are required)
+ $ 125.00
MSD Crank Trigger System Installed when Requested
+ $ 295.00
Complete Turn Key EFI EZ 2.0 Fast System Installed and Dyno Tested for Pro Street Applications
+ $1995.00
Power Master 4.0 HP New Starter, SFI 168 Tooth Internally Balanced in House Flex-Plate and ARP Bolt Kit
+ $ 375.00
Steel Billet Internally Balanced Flywheel for Marine Applications Requiring a Flywheel
+ $ 345.00
10″ XHD Pro Street Custom Converter Matched per your dyno results and Application and Needs for 850HP
+ $ 495.00
Awesome-Glide 1200Hp with Trans Brake, 300 M, 8-Pack Direct, 1.80 Gear Set and Proper Matched Components
+ $2475.00
HD TH400 Transmission and Pro Street 10″ Torque Converter to Match Engine and Cars Performance Needs for Gear, Tire, Weight Application
+ $2475.00

Dyno Tested and Tuned with Exxon 93 Pump Gas  • Vacuum Pump • HP Corrected to Sea Level

Free freight includes item shipped to a commercial address in the 48 states costing no more than $400. Anything over, handling fee, special insurance, residential, lift gate service, out of area charges, will apply for your zip code where you have this engine shipped to. Total cost of any extra charges will be known to you before we ship.

Comments are closed.