565ci 1300HP BBC Nitrous Race Engine

565ci BBC 1300HP Nitrous Race Engine


This NOS Race Engine is not all top shelf, but needs nothing to add on for well over a 1200hp and up to 1400HP with our NX RNC 700HP Nitrous Kit. The World Merlin IV splayed cap race block works great and gives us lots of block. Comp Cams HIPPO roller lifters, K1 or Manley crank, 6.535 I beam steel rods, good .180″ wall pins, Hell Fire 043/043/3.0mm ring set, Cloyes billet timing set, ATI Dampener, Pac 1224 .850″ lift roller springs, MLS head gaskets, Moroso oil pump and pan and Crank Trigger all add up to a great priced NOS race engine.


9.780″ Deck | 4.6″ Bore | 4.25″ Stroke | 6.535 Rods | 1300HP @ 6800 rpm 400Hp Hit

Actual Dyno of 2 stage 632


  • World Merlin IV Splayed Cap Fully CNC Race Prepped Block
  • ARP 435-4713 Head and Inner Valley Stud Kit Plate Honed with the Block
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • K1 or Manley 4340 Counter Weighted Internally Balanced Crank
  • 6.385 K1 or Manley H-Beam 4340 Severe Duty Rods with ARP2000 Bolts
  • Clevite or King “HP” Race Series Main and Rod Bearings
  • JE or Wiseco Gas Ported Coated Skirt Nitrous Pistons
  • Tool Steel .180″ Thick Wall N2O Wrist Pins
  • TS 043/043/3mm Stainless Steel, TNT or Hell Fire Nitrous Rings
  • Comp Cams .800″ 7/4 Swap Steel Billet Nitrous Cam
  • Cloyes Billet True Roller Timing Set and Torrington Bearing
  • Polished Aluminum Timing Cover and Billet TDC Pointer
  • Comp Cams HIPPO Solid Roller Lifters
  • ATI Super Dampener Specific Hone to Crank Shaft
  • AFR 385cc Fully CNC Ported Heads Flow 434/340@.800″
  • AFR 2.350 x 1.880″ Severe Duty Stainless Steel Valves
  • Pac 1224 .850″ Lift Roller Springs and Titanium Retainers*
  • Cometic or Fel Pro .051″ MLS Head Gaskets
  • Manley .135″ Wall Push Rods
  • Comp Cams Pro Magnum Roller Rockers and Jomar Stud Girdle
  • AwesomeEngines® CNC Logo Powder Coated Valve Covers
  • Moroso 22185 Oil Pump Package Kit
  • Moroso 7qt. Drag Race Oil Pan
  • ProFiler CNC Match Ported Intake Manifold
  • Jomar CNC Ported Heat Resistant Spacer and Stud Kit
  • Nitrous Express RNC Plate System 250 to 750+Hp
  • Holley Ultra or QFT N2O Special 1150CFM FX Series Carb
  • MSD 85561 Distributor, Wires and NGK Plugs
  • AwesomeEngines® T Shirt and (Free 48 State Continental Freight)


Steel Billet Splayed Cap Upgrade
+ $ 450.00
Callies Magnum Internally Balanced Crank
+ $1275.00
Oliver Steel I Beam Rods with L19 Bolts
+ $ 975.00
Bill Miller or GRP Aluminum NOS Connecting Rods and Machining of the Block for Thick Rod Clearance
+ $1075.00
Jesel Belt Drive System Installed
+ $ 875.00
Enconel Exhaust Valves
+ $ 195.00
Moroso 22163 Billet Gerotor Oil Pump Installed
+ $ 275.00
Moroso Pro Eliminator Aluminum Kick Out Sectional Oil Control Baffled Oil Pan
+ $ 475.00
Moroso 3 Vane Vacuum Pump System and Pump Mounted Relief Valve, Mandrel, Lines, Billet Tank and All Hardware
+ $1075.00
Crank Trigger System Installed
+ $ 275.00
Ultra SFI Flex-plate House Internally Balanced, ARP Flex-plate Bolt Kit
+ $ 125.00
New Max-2000 Series 2000Hp Power Glide with Roller Bearing Extension and All Top Shelf Internals 60 Day Warranty
+ $3875.00
10″ Custom N2O Torque Converter with Steel Stator Custom Pump and Turbine
+ $1475.00
Power Master XL Series Race Starter
+ $ 275.00

Dyno Tested and Tuned Using C16 Race Fuel • Vacuum Pump • HP Corrected to Sea Level

Free freight shipping does apply to this item shipped to the UPS terminal in the continental 48 states for your zip code given to ship. Any required insurance, residential, lift gate, or out of area charges, will apply for your area code where you choose this item to be shipped to for the terminal for your zip code area.

Comments are closed.