565ci 700 HP BBC Street Heat Engine

565ci 700Hp BBC Street Heat Crate Engine

Pro Street Crate Engines are completed dyno tested ready units Best in the business and professionally machined on a Centroid 4 axis CNC block machining center for dead on tolerances. Then professionally assembled and dyno tested and tuned for maximum HP


9.785″ Deck | 4.6″ Bore | 4.250″ Stroke | 6.385″ Rods | 700Hp @ 6200 rpm


  • Dart Big M or World IV Splayed Cap 4 Axis CNC Race Prepped Block
  • Brass or Stainless Steel Lifetime Freeze Plugs Installed
  • 12 Point Head Stud Kit Plate Honed with the Block
  • AR K1, Eagle or Scat Steel 4340 Internally Balanced Forged Crank
  • AR K1 Eagle or Scat H Beam 4340 Steel Rods with ARP 8740 7/16 Bolts
  • King “HP” Race Series Main and Rod Bearings
  • JE/SRP or Wiseco Pro True 10.5:1 Coated Forged Pistons
  • Total Seal Plasma Moly File to Fit Hi-Performance Ring Set
  • Comp Cams or Erson Hydraulic Roller Cam (solid available)
  • Comp Cams or Erson Hydraulic Roller Lifters (solid available)
  • Cloyes True Roller Billet Timing Set
  • GM Solid Chrome Timing Cover and TDC Verified Pointer
  • Brand New Internally Balanced Harmonic Damper
  • 345 or 360cc Clean Cast Aluminum Heads
  • Manley Race Master Stainless Steel Valves, 2.3 x 1.88″
  • Comp Cams or Erson 1.550″ Hydraulic Roller Springs and 10° Retainers
  • Fel Pro 1057 Racing Head Gaskets
  • Manley 3/8 x .080″ Wall Heavy Duty Push Rod Set
  • Comp Cams Ultra Gold Aluminum Roller Rocker Arms
  • Polished Aluminum Tall Valve Covers
  • Moroso #22185 HV Oil Pump Kit and Tig Welded Pickup Tube
  • Moroso 7qt. Hi-Performance Oil Pan; (marine available)
  • Air Gap or Single Plane 4150 Series Intake and Phenolic Spacer
  • QFT RQ-1050 cfm 4150 Pro Street Carburetor
  • MSD Billet Dist, Wires and NGK Plugs (dyno tuned)
  • free 48 freight to continental USA

Any Upgrade or Option not Listed is Available (call)

Pro Street 7/4 Swap Solid Roller Cam, .135 Wall Push Rod, Comp Cams Hippo Lifter, Titanium Retainer, 1.640 Nex Tek Spring, Jomar Stud Girdle
+ $ 895.00
Dart Pro 1 345cc (add $400) PRO 1 345cc with CNC Ported Combustion Chamber Aluminum Heads 725+ Hp for the Street
+ $ 750.00
Inner Valley Head Stud Kit Installed
+ $ 95.00
Fel Pro #1077 MLS Severe Duty N2O Head Gaskets
+ $ 125.00
ATI SFI Super Damper Specific Honed to Crank Installed
+ $ 275.00
AwesomeEngines® CNC Engraved Logo Then Powder Coated Covers with Billet Oil Fill and Breather Holes
+ $ 295.00
Pro Filer Sniper Jr CNC 4500 Match Ported to Cylinder Heads (will require a 4500 Dominator or FX QFT 1050)
+ $275.00
QFT FX Series 1050cfm 4500 Carburetor and Special Jomar Spacer for All Out Air and Fuel Delivery
+ $ 575.00
Complete Turn Key EFI EZ 2.0 Fast System Installed and Dyno Tested for Pro Street Applications
+ $1975.00
Nitrous Upgrade Kit, ( MLS Head Gaskets, .180 Wall Wrist Pins, Hell Fire Ring Set )
+ $ 495.00
Power Master 4.0 HP New Starter, SFI 168 Tooth Internally Balanced in House Flex-Plate and ARP Bolt Kit
+ $ 375.00
10″ XHDLS Pro Street Custom Converter Matched per your dyno results, needs and good for 850HP
+ $ 595.00
Awesome-Glide 1200Hp with Trans Brake, 300 M, 8-Pack Direct, 1.80 Gear Set and Proper Matched Components
+ $2475.00
HD TH400 Transmission and Matched Pro Street 10″ Torque Converter for your Engine and Cars Performance Needs
+ $2475.00

Dyno Tested and Tuned with Exxon 93 Pump Gas • Vacuum Pump • HP Corrected to Sea Level

Free freight applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this engine shipped to. Total cost of these charges if any will be known to you before we ship. #14040/12915

Comments are closed.