565ci 800HP BBC Pro Street Crate Engine

565ci 800Hp BBC Pro Street Crate Engine

The Pro Street Series Crate Engines are completed ready to run units that are professionally CNC machined, completely assembled, dyno tested and tuned for maximum performance and longevity. They are the best.


9.785″ Deck | 4.6″ Bore | 4.25″ Stroke | 6.385″ Rods | 800 Hp @ 7000 rpm


  • Dart Big M or World IV Splayed Cap 4 Axis CNC Race Prepped Block
  • Brass or Stainless Steel Lifetime Freeze Plugs Installed
  • Inner Valley Stud Kit and 12 Point Head Stud Kit
  • Dart, K1 or Manley 4340 Forged Steel Crank Internally Balanced
  • K1 Manley or Scat H-Beam Rods with ARP 2000 Bolts
  • King “HP” Race Series Main and Rod Bearings
  • JE or Wiseco 10.55:1 Pro Series Forged N2O Racing Pistons and 180 Pins
  • Total Seal TNT or Hell Fire .043/.043/3 mm Racing Ring Set
  • Comp Cams or Erson 7/4 Swap Pro Street .800″ Solid Roller Cam
  • Comp Cams ” HIPPO” Pro Street Series Solid Roller Lifters
  • Cloyes Billet True Roller Timing Set or Quiet Gear Drive (your choice)
  • Solid Polished Aluminum Timing Cover
  • Billet Aluminum TDC Pointer TDC Verified to the Damper
  • ATI SFI Super Dampener Specific Honed to Fit Crank Hub
  • Brodix 351Oval Port Fully CNC Ported Aluminum Heads
  • 2.350/1.85 11/32 Stainless Steel Valves
  • Manley Nex Tek 1.64 Solid Roller Springs, Titanium 10° Retainers
  • Fel Pro MLS Severe Duty Marine and Racing Head Gaskets
  • Manley 3/8 x .135″ Wall Severe Duty Push Rod Set
  • Comp Cams Pro Magnum Roller Rockers and Jomar Stud Girdle
  • AwesomeEngines® CNC Engraved Powder Coated Pro Series Valve Covers
  • Moroso 22185 Oil Pump Kit and Proper Moroso Pick Up Tube
  • Moroso 7qt. Hi-Performance Oil Pan; (marine available)
  • Brodix or Sniper II Series CNC Ported Intake Manifold
  • Jomar Phenolic Special CNC Ported 4 Hole Heat Sync Spacer
  • Holley Ultra or QFT FX 1150 4500 Pro Street Carburetor (dyno tuned)
  • MSD Billet Dist, Wires and NGK Plugs (dyno tuned)
  • free 48 freight to continental USA

Upgrade or Option not Listed is Available (call)

Dart or Brodix Aluminum Light Weight Block Fully CNC Race Prepped to Specifications and Special Head Stud Kit
+ $3995.00
Callies Magnum 4340 USA Steel Crank Shaft Internally Balanced with Heavy Metal Included
+ $1495.00
Callies H Beam Ultra Series Steel Rods with ARP L19 Bolts
+ $ 599.00
Callies Ultra I Beam with ARP L19 Bolts (add $1195.00) or Oliver Steel I Beam Rod with ARP L19 Bolts
+ $ 995.00
Titanium Intake Valves with Copper Beryllium Seats
+ $ 995.00
Enconel Exhaust Valves
+ $ 395.00
Hydraulic DRST (drag race short travel) Racing Hydraulic Roller Lifters
+ $ 495.00
RED-ZONE Solid Needle Roller Lifters
+ $ 695.00
Isky EZ-ROLL MAX Solid Bushing Roller Lifters (best lifters period)
+ $ 995.00
Jesel or T&D Pro Series 1 Piece Intake Bar Shaft Rocker System Installed
+ $1395.00
Trend Taperwall 7/16 Push Rods Installed for Maximum Valve Train Stability (must have shaft rockers)
+ $ 395.00
Total Seal Stainless Steel, TNT or Hell Fire Rings
MSD Crank Trigger System Installed
+ $ 295.00
Complete 50-513 (1250hp) Sniper Complete with 160 Pump Fuel Injection System Installed, Dyno Tested and Tuned (Silver or Gold Color is Available)
+ $1295.00
Complete EZ EFI Fast 30226-06 Kit Fuel Injection System Installed, Dyno Tested and Tuned for EZ EFI Set Up
+ $1475.00
Power Master 4.0 HP New Starter, SFI 168 Tooth Internally Balanced in House Flex-Plate and ARP Bolt Kit
+ $ 225.00
10″ XHD Pro Street Dual Anti Balloning Plates Custom Converter Matched per your dyno results needs and good for 850HP
+ $ 695.00
HD TH400 Transmission and Matched Pro Street 10″ Torque Converter for your Engine and Cars Performance Needs
+ $1875.00

Dyno Tested and Tuned with Exxon 91° Pump Gas • Vacuum Pump • HP Corrected to Sea Level

Comments are closed.