565CI BBC 1700HP Nitrous Race Engine

565ci 1700HP Nitrous Race Engine

$18,495.00

9.800″ Deck | 4.600″ Bore | 4.250″ Stroke | 1700HP @ 6800 rpm

Components

  • Dart Big M or Merlin III CNC Blue-Printed Race Prepped Block
  • Stainless Steel Freeze Plug Kit Installed
  • Oring Block w/Stainless Steel Wire, Head and Inner Valley Stud Kit
  • Callies Dragon Slayer Internally Balanced Crank
  • Oliver Steel I Beam Severe Duty Rods
  • Clevite or King “HP” Race Series Main and Rod Bearings
  • Wiseco Big Hit Nitrous Gas Ported Coated Skirt Pistons
  • .200″ Thick Wall Tool Steel Nitrous Wrist Pins
  • Total Seal 043/043/3mm Stainless Steel Nitrous Rings
  • AR-Comp Cams 7/4 Swap Billet Nitrous Cam
  • Cloyes 9-3747 Quick Adjust Billet Timing Set w/True Roller and Torrington
  • AwesomeEngines®/Comp Cams 3 Piece #312 Polished Aluminum T/Cover
  • Comp Cams HIPPO (hi-pressure pin oiling) Roller Lifters
  • ATI Super Dampener w/Billet TDC Pointer
  • Brodix O-365cc Fully CNC Ported Heads
  • Brodix 2.350 x 1.880 Severe Duty Stainless Steel Valves
  • Manley Nex Tek New 1.500 Competition Eliminator Springs / Tit Ret
  • SCE Copper Head Gaskets w/Receiver Grove Heads
  • Trend Taper Wall 7/16 x .165″ Wall Push Rods
  • Comp Cams Magnum Rockers w/Jomar Girdle
  • AwesomeEngines® CNC Logo P/Coated V/Covers
  • AwesomeEngines®/Moroso 22163 Billet Aluminum Oil Pump
  • AwesomeEngines®/Moroso 21049 Kick Out Eliminator Pan
  • Brodix CNC Ported Intake Manifold w/Jomar Spacer
  • Nitrous Express NRC Plate System 250-800+Hp
  • Holley Ultra or QFT N2O Special 1150CFM FX Series Carb
  • MSD 84697 Distributor, Crank Trigger, 10.5mm Wires, NGK Plugs
  • AwesomeEngines® Shirt, Free 48 Freight (see 2013 updates)

Available Upgrades

Dart Raised .600 Cam Special Race Block w/Wide Oil Pan and 54mm Camshaft (will require Jesel belt drive $595)
+ $ 895.00
Brodix or Dart Aluminum Block Fully CNC Blue-Print Race Prepped w/Special Stud Kit
+ $3895.00
Callies Magnum Series Internally Balanced Crank (magnum not needed but will require heavy metal and 2 pieces are included in price)
+ $ 595.00
GRP Billet Aluminum Pro Mod Rods Installed and Block Radial Cleared for Big Rods
+ $ 250.00
Precision .300 x .250 Taperwall Wrist Pins (used for 2 stages or 600+hp, may require more heavy metal)
+ $ 195.00
Comp Cams Pro Series Billet Belt Drive or Jesel Sportsman Series Installed
+ $795.00
Manley Titanium Intake Valves Installed
+ $ 795.00
Crower Stainless Steel or T&D Pro Series 1 Piece Shaft Rocker System
+ $ 995.00
Moroso 22167 Billet Gerotor Oil Pump Installed
+ $ 125.00
20385 Moroso Pro Eliminator Aluminum Oil Pan
+ $ 295.00
Moroso Complete External Oil Pump w/Special 20385 Aluminum Revised Oil Pan w/Special Pickup Installed
+ $ 895.00
Moroso Complete 5 Stage Dry Sump System Installed
+ $2995.00
Moroso Accumulator System Installed
+ $ 295.00
Moroso New Vacuum Pump System w/Pump Mounted Relief Valve, Mandrel, Lines, Billet Tank and All Hardware
+ $1095.00
NX 200-600Hp Shark Nozzle System Installed w/L-250 Low Amp Solenoids (w/lower compression included w/up to 2000Hp)
+ $1795.00
CV Products Made in the USA Starter, Ultra SFI Flex-plate House Internally Balanced, ARP Flex-plate Bolt Kit
+ $ 325.00
New PRO DADDY 2000Hp Power Glide w/Roller Bearing Extension and All Top Shelf Internals
+ $3895.00
10″ Custom N2O Torque Converter w/Steel Stator Custom Pump and Turbine Built for 2000HP
+ $1495.00
New Complete EZ EFI 2.0 System Dyno Tuned and ready to Race. Complete Nitrous Ready
+ $2495.00

Dyno Tested & Tuned • Vacuum Pump • HP Corrected to Sea Level

Comments are closed.