578ci 1030 Hp Magnum Pontiac Race Engine

578ci 1030Hp Magnum Pontiac Race Engine


10.230″ Deck | 4.400″ Bore | 4.750″ Stroke | 6.700″ Rods | 1030Hp @ 7200 rpm


  • MR1 Splayed Cap Fully Race Prepped Block
  • Bronze Lifter Bore Bushings for .904″ Lifter Bore
  • ARP Head Stud Kit is Available and Used to Plate Honed the Block
  • Bryant or Callies XL Steel Billet 4340 Internally Balanced Crank
  • Oliver I Beam Steel Rods with L19 Bolts
  • Clevite or King HP Series Main and Rod Bearings
  • JE or Wiseco 15:1 Compression 2618 Forged Pistons
  • JE or Wiseco .180″ Wall Tool Steel Wrist Pins
  • Total Seal SS, TNT or Hell Fire 043 043 3.0 mm Rings
  • Competition Cams .800″ Lift 55mm Steel Billet Roller Cam
  • Cloyes Billet True Roller and New Aluminum Timing Cover Kit
  • Crower .903″ HIPPO Solid Roller Lifters
  • ATI Super Damper and Billet TDC Pointer

  • High Port Fully CNC Ported Heads 430 cfm
  • Ferrea 2.250 x 1.750″ Stainless Steel Valves
  • Manley or Pac Racing Springs and Titanium Retainers
  • Cometic Multi-Layer Head Gaskets
  • Manley or Trend 3/8 x .135″ Wall Push Rods
  • Jesel or T&D Pro Series Shaft Rocker System
  • AwesomeEngines® CNC Engraved Powder Coated V-Covers
  • Melling M54F 80lb Pressure Oil Pump and Proper Pickup
  • Moroso 8qt Custom Oil Pan
  • Edelbrock Victor CNC Match Ported Intake and Jomar Spacer
  • Holley or QFT FX 1150 CFM Carburetor
  • MSD Crank Trigger Black Distributor, 8.5 Wires, NGK Plugs
  • AwesomeEngines® T-Shirts, Free 48 Freight

Available Options

MR1 Aluminum Race Block, Bronze Lifter Bore, 4 Bolt Front Cap, Special Head Stud Kit Light Weight Block
+ $1875.00
WARP 6 KRE Aluminum Cylinder Heads with Titanium 2.400/1.850 Valves Symmetrical Port Heads, Sheet Metal Intake 2×4
Callies Ultra I Beam Steel Rods with ARP L19 Rod Bolts
+ $1275.00
JE or Wiseco Tool Steel .240″ Wall Extreme Duty Wrist Pins
+ $ 250.00
Jesel or T&D Shaft Rocker System with Roller Tip Bearing
+ $ 275.00
Moroso Complete Vacuum Pump System Installed
+ $1075.00
High Port 430 cfm Heads with Full Ported Intake 960+HP
+ $1475.00
MSD Crank Trigger Dyno Tested and Tuned
+ $ 295.00

Dyno Tested and Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • HP Corrected To Sea Level

Some Components May Be Subject To Change of Equal Value Due To Availability. Free Freight up to $400 and Applies To This Advertised Engine Shipped To A Commercial Address Or The UPS Terminal Closest To Your Zip Code For Pickup In The 48 States. Any Shipping Charges over $400, Residential, Out-Of-Area, Lift Gate Service, Additional Insurance and Handling Fees Apply If Requested.

Comments are closed.