582ci 1060HP BBC Bullet Race Engine

582ci 1060Hp BBC Bullet Race Engine


9.78″ Deck | 4.6″ Bore | 4.375″ Stroke | 6.385″ Rods | 820 lbs @ 6000 rpm 1060 Hp @ 7400 rpm


  • Dart Big M or World IV Splayed Cap 4 Axis CNC Race Prepped Block
  • ARP 12 Point Head and Inner Valley Stud Kit Plate Honed with Block
  • Stainless Steel or Brass Lifetime Freeze Plug Kit Installed
  • Manley 4340 Internally Balanced Crank
  • Manley Steel H-Beam Rods with ARP 2000 Bolts
  • King “H” Race Series Main and Rod Bearings
  • Wiseco 15.31:1 Quick 16 Pro Series Gas Ported Coated Skirt Pistons
  • .180″ Thick Wall Tool Steel 1400 Hp Wrist Pins
  • Total Seal Stainless Steel, TNT or Hell Fire Low Tension Ring Set
  • Comp Cams .850″ 7/4 Swap Steel Billet Roller Camshaft
  • Comp Cams New Design HIPPO Severe Duty Solid Roller Lifters
  • Cloyes Billet True Roller Timing Set with Torrington Bearing
  • Solid Polished Aluminum Front Timing Cover
  • ATI Super Damper with Billet TDC Verified Pointer
  • ProFiler 174X 375cc Fully CNC Heads; 460/325 Flow @ .800 Lift
  • ProFiler 2.35″ x 1.85″ Stainless Steel Valves
  • Manley or PAC Racing Triple Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Multi-Layered Head Gaskets
  • Manley or Trend Taper-Wall 7/16 x .165″ Wall Severe Duty Push Rods
  • Jesel or T&D Pro Series 1 Piece Intake Bar Shaft Rocker System
  • AwesomeEngines® CNC Engraved Powder Coated Logo Valve Covers
  • Moroso #22185 Billet Oil Pump Kit
  • Moroso Pro Eliminator Aluminum #21049 Kick Out Oil Pan
  • ProFiler CNC Match Ported 4500 Intake Manifold
  • Special Jomar Heat Sink CNC Ported Spacer
  • QFT 1250 cfm FX Race Series Carburetor
  • MSD 84697 Big Cap Distributor and Crank Trigger Installed
  • Free 48 State Freight

Available Upgrades

Dart or World IV Steel Billet Splayed Cap Racing Block
+$ 495.00
Dart Big M Pro with 54mm Raised Cam, 903″ Lifters, Steel Billet Cap, Wide Oil Pan Racing Block +10hp
+ $ 995.00
Brodix or Dart Aluminum Block and ARP Special Head Stud Kit
+ 3995.00
Callies Magnum or Crower Enduro 4340 USA Center Counter Weight Internally Balanced Crank and Heavy Metal Included in the Price
+ $1295.00
Callies XL Light Weight 4340 USA Center Counter Weight Internally Balanced Crank and Heavy Metal Included in the Price
+ $1895.00
Oliver Steel I Beam Max Series Rods and L19 Bolts
+ $ 995.00
Callies Ultra Series I Beam Rods and L19 Bolts
+ $1195.00
Comp Cams New Needless Bushed Roller Lifters (these are the new era of roller lifters)
+ $ 295.00
Erson “HIPPO” (high pressure pin oiling) Severe Duty Roller Lifters with Solid Bushed Roller Lifters
+ $ 495.00
Isky Red Zone Solid Needle Bearing Roller Lifters
+ $ 595.00
Isky EZ MAX 37296LO180 Bushed Roller Lifters (best in the business)
+ $ 795.00
Comp Cams or Jesel Belt Drive Installed (standard cam height)
+ $ 995.00
Titanium 2.350″ Intake Valves
+ $ 795.00
T&D Shaft Rocker Roller Tip and Spring Oil Option Installed
+ $ 325.00
Moroso #22163 Billet Gerotor Oil Pump
+ $ 125.00
Moroso 4 Stage Dry Sump System Installed
+ $2995.00
ATI Impregnated Damper for Crank Trigger
+ $ 175.00
SFI 168 Tooth Flex-Plate Internally Balanced in House with ARP Bolt Kit
+ $ 125.00
Power Master 4.0Hp Ultra High Torque Made in the USA Mini Starter and Bolt Kit
+ $ 225.00
Moroso Vacuum Pump, Pump Mounted Relief Valve, 3 Bolt Mandrel, Hoses, AN Fittings, Brackets, Pulley’s for a Complete Kit
+ $1075.00
Ron’s Terminator Injection System Installed for a Turn Key Dyno Tested Engine with 1040Hp
+ $1995.00

Dyno Tested and Tuned with 112 Fuel • Vacuum Pump • Corrected to Sea Level

Free freight of $500 applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges that exceed $500 will be known to you before we ship.

Comments are closed.