582CI BBC 1060HP Magnum Race Engine

582ci BBC 1060 Hp Magnum Race Engine

$19,999.00

9.797″ Deck | 4.6″ Bore | 4.375″ Stroke | 6.385″ Rods | 825 lbs @ 6000 rpm 1060 Hp @ 7600 rpm

Components with * are Upgraded Parts

  • *Dart Big M Pro RC .600 Steel Billet Splayed Cap Race Block with 54mm Cam
  • *ARP 12 Point Head and Inner Valley Stud Kit Plate Honed with Block
  • *Callies Magnum Series 4340 Internally Balanced Crank
  • *Callies Ultra H-Beam 4340 Rods with L19 Bolts
  • King “H” Race Series Main and Rod Bearings
  • *Wiseco 15.3:1 Quick 16 Gas Ported Coated Skirt Pistons
  • *.180″ Thick Wall Tool Steel Wrist Pins
  • *Total Seal 043/043/3mm Stainless Steel or Hell Fire Low Tension Rings
  • *54mm Comp Cams .900″ Steel Billet 7/4 Swap Cam
  • Cloyes Billet True Roller and Solid Polished Aluminum Cover
  • *Comp Cams .904″ HIPPO (hi-pressure pin oiling) Roller Lifters
  • *ATI Super Dampener Specific Honed To Crank Shaft
  • TDC Verified with Billet TDC Pointer
  • *ProFiler 174X 375cc Fully CNC Heads; 460/325 Flow @ .800 Lift”
  • Profiler Intake 2.350 and 1.85″ Stainless Steel Valves
  • *Manley 221448 or Pac 1248 Triple Springs and Tool Steel Retainers
  • Cometic or Fel Pro MLS Severe Duty Head Gaskets
  • *Trend 7/16″ Taper Wall Extreme Duty Push Rods
  • *Jesel or T&D Pro Series Shaft Rocker System with Spring Oilers
  • *AwesomeEngines® CNC Logo Powder Coated Valve Covers
  • *AwesomeEngines® Moroso #22163 Billet Oil Pump
  • *AwesomeEngines® Moroso #20385 Aluminum Pro Eliminator Oil Pan
  • *Sniper CNC Ported Special Intake Manifold for 174X Heads
  • *QFT 1250cfm FX Carburetor, Jomar 3D CNC Ported Heat Sink Spacer
  • *MSD Distributor, Crank Trigger, Wires and NGK Plugs
  • Free Continental 48 State Freight

Available Upgrades

55mm Cam Bearings, Camshaft and Bushed Roller Lifters (key way bushings and style lifters are available, call for pricing)
+ $ 995.00
Brodix or Dart Aluminum Block Fully Race Prepped with Special ARP Head Stud Kit
+ $3495.00
Callies Magnum XL Series 59lb Light Weight Internally Balanced Crank
+ $ 995.00
Oliver Steel I Beam ($695) or Callies Ultra I Beam Steel Rods (best in the business)
+ $ 895.00
Trend or Precision .200-220″ Tool Steel Wrist Pins (will require heavy metal fees)
+ $ 195.00
Titanium Intake Valves
+ $ 795.00
Jesel Raised Cam Belt Drive Installed
+ $1295.00
Isky Red Zone Upgraded Needle Bearing Roller Lifters
+ $ 495.00
EZ Max 376RHM904 Solid Bushing Roller Lifters or what ever offsets are required for application (the best roller lifter available)
+ $ 895.00
Moroso Complete Vacuum Pump System Completely Installed; upgraded pump mounted relief, Billet Mandrel, Billet Tank and Complete Kit
+ $1075.00
Moroso 4 Stage Dry Sump System Installed
+ $2995.00
Ultra SFI 168 Tooth Flex-plate Internally Balanced in House with ARP Bolts
+ $ 125.00
Power Master 4.0″ Hp High Torque Gear Reduction Made in the USA New Design Starter
+ $ 195.00
Nitrous Express Complete Plate System from 100-500Hp Installed
+ $1095.00
Nitrous Express 200-600Hp Shark System with new L-250 Low Amp Solenoids Installed
+ $1595.00
New “BIG DAWG” Steel Stator Natural or NOS Style Converter
+ $1495.00
New PRO DADDY 2000Hp Power Glide with Roller Bearing Extension and All Top Shelf Internals
+ $3995.00

Dyno Tested and Tuned with C14 Race Fuel • Vacuum Pump • Sea Level Conditions

20500/19999

Comments are closed.