582ci 1050HP BBC Pro Magnum Race Engine
The 582ci BBC Magnum is a favorite especially with 1050+hp. Featuring a phenomenal list of engine parts that starts with Brodix 383cc Head Hunter fully cnc ported heads, Dart Big M ($250 rebate) or a PBM by MERLIN III 55mm cam splayed cap block, Oliver billet rods, Wiseco Quick 16 gas ported pistons & 043-043-3mm rings, Moroso Pro Eliminator aluminum pan, billet gerotor oil pump and is also Nitrous ready! (072910)
$19,999.00
9.800″ Deck | 4.600″ Bore | 4.375″ Stroke | 1050Hp @ 7400 rpm
Components
- Dart Big M or PBM by MERLIN III 55mm Splayed Cap Block
- Callies Magnum 4340 Internally Balanced Crank
- Oliver Steel Billet I Beam Rods
- Wiseco 15:1 Quick 16 Gas Ported Pistons & Tool Steel Pins
- Total Seal Stainless Steel N2O 043-043-3.0mm Rings
- King “H” Race Series Main and Rod Bearings
- Comp Cams or Jesel Belt Drive System Installed
- ATI 6-3/8″ Internally Balanced Lightweight Damper
- Moroso 22167 Gerotor Billet Oil Pump
- Moroso #20385 Aluminum Pro Elim Oil Pan
- MSD Distributor, Wires and NGK Race Plugs
- MSD or Moroso Crank Trigger Ignition System
- Awesome Engines T-Shirt, Brodix & Dart Hat
- Brodix Head Hunter 383cc Fully CNC Ported Heads
- Brodix 2.375 x 1.850″ Severe Duty Stainless Valves
- Pacaloy Triple Springs and Titanium Retainers
- Cometic MLS Head Gaskets
- ARP Head Stud and Inner Valley Stud Kit
- Manley 7/16 x .165″ Wall Extreme Duty Push Rods
- 55mm Comp Cams .900″ Steel Billet 7/4 Cam
- Comp Cams or Morel .904″ HIPPO Roller Lifters
- T&D Shaft Rocker System Installed
- Brodix BM2017 CNC Ported Intake
- Jomar Special 3D CNC Ported 1¼” Heat Sink Spacer
- QFT 1150cfm FX Series Carburetor
- AERC CNC Red & Black Logo Powder Coated V/Covers
Upgrades and Options
Brodix 55mm Raised Cam ½ Filled Aluminum Block, .904″ Lifters, and Head Stud Kit
+ $3000.00
Callies XL Magnum Series Lightweight 4340 Crank
+ $1400.00
Groden Aluminum Heavy Duty Rods (clearance included)
+ $300.00
Total Seal TNT Extreme Duty Rings
+ $25.00
Precision Products Tool Steel .220″ Thick Wall Pins & Heavy Metal
+ $200.00
Titanium Intake Valves Installed
+ $800.00
Front Mounted MSD Distributor Upgrade for the Most Accurate Timing
+ $700.00
Moroso Complete Vacuum Pump System Installed
+ $900.00
Moroso 5 Stage Dry Sump System Installed Completely (no need for a vacuum pump)
+ $3500.00
CFE Sheet Metal 2×4 Intake with 2 QFT 1150 FX Carbs and Linkage with 1 Set of N2O Bungs
+ $3200.00
N2O 300-600Hp Shark Fogger Kit Installed
+ $1500.00