598ci 1000HP Big Block Ford Pro Bullet Race Engine

598ci 1000Hp Big Block Ford Pro Bullet Race Engine


10.300″ Deck | 4.6″ Bore | 4.500″ Stroke | 6.700″ Rods | 1000hp @ 7200rpm


  • Ultra Eliminator Splayed Cap Race Block
  • 12 Point Head Stud Kit Plate Honed with Block
  • 4.500″ Stroke Internally Balanced 4340 Steel Crank
  • K1 or Manley H Beam Steel Rods with ARP 2000 Bolts
  • King “HP” Race Series Main and Rod Bearings
  • Diamond JE or Wiseco 15:1 Forged Pistons .043.043 3mm
  • .180 Wall 1400 hp Steel Wrist Pins
  • Total Seal Stainless Steel, TNT or Hell Fire Piston Rings
  • Comp Cams .800″ Solid Roller Camshaft
  • Comp Cams HIPPO Solid Roller Lifters
  • Cloyes Billet True Roller Timing Set
  • New Timing Cover Assembly
  • ATI Billet TDC Verified Pointer
  • ATI Super Damper (best in the business)
  • TFS-5451T804-C03 A460Fully CNC Ported 360cc Heads
  • TFS 2.4 and 1.88 Intake and Exhaust Stainless Steel Valves
  • Pac 1.500″ Springs and Titanium Retainers
  • Fel Pro Racing Head Gaskets
  • Manley 3/8 x .135″ Wall Push Rods
  • Comp Cams Magnum Series Rockers
  • TFS Specific Stud Girdle System
  • Melling M84HDV Blue Printed Pump Kit
  • Moroso 8 Qt. Stroker Oil Pan
  • TFS 5440011 Match Ported Intake Manifold
  • Jomar Special CNC Ported Spacer
  • QFT 1250cfm FX Series Carburetor
  • MSD Billet Dist, 8.5mm Spark Plug Wires and NGK Plugs
  • AwesomeEngines® T-Shirt, (free 48 freight)

Available Upgrades

Callies 99QH29MG Magnum Series Internally Balanced Crank Shaft (when available)
+ $1495.00
Callies 4340 Steel Billet Ultra Crank Shaft No Drill Internally Balanced for this Bob Weight
+ $2775.00
Scat 4340 Steel Billet Crank Shaft Internally Balanced for this Bob Weight
+ $2475.00
Callies Ultra or Oliver Steel I Beam Steel Rods, Best in the Business
+ $1075.00
Jesel or T&D Shaft Rocker System Installed
+ $1495.00
Trend Taper Wall 7/16″ Severe Duty Push Rods
+ $  245.00
Cometic MLS Head Gaskets
+ $  175.00
Moroso Complete Vacuum Pump System Installed
+ $1075.00
TFS A460 Tunnel Ram 5449400 Intake Manifold 1040Hp with 2×4 Carbs and Linkage
+ $1995.00
MSD Crank Trigger System, Required with Tunnel Ram Option
+ $  395.00
Fully Port Either Intake Manifold for Maximum Performance
+ $  795.00
Isky RED ZONE Racing Roller Lifters, Best in the Business
+ $ 895.00
Rons Terminator Injection System Completely Installed and Dyno Tested and Tuned
+ $2075.00

Dyno Tested and Tuned with 112 Racing Fuel • Vacuum Pump • Crank Trigger • HP corrected to Sea Level

Free freight applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges if any will be known to you before we ship.

Comments are closed.