598ci 850HP BBC Pro Street Crate Engine

598ci 850HP BBC Pro Street Crate Engine

$16,999.00

Pro Street Crate Engines are completed dyno tested ready units Best in the business and professionally machined on a Centroid 4 axis CNC block machining center for dead on tolerances. Then professionally assembled and dyno tested and tuned for maximum HP

(see 632ci 910hp actual dyno pull)

9.8 or 10.2 | 4.6″ Bore | 4.5″ Stroke | 6.385-9.8″ or 6.7-10.2″ Rods | 850 Hp @ 7000 rpm

Components

  • World IV Splayed 4 Bolt Main Cap 4 Axis CNC Race Prepped Block
  • Brass or Stainless Steel Lifetime Freeze Plugs Installed
  • Inner Valley and 12 Point Hp Head Stud Kit Plate Honed with Block
  • Dart or Manley 4340 Forged Steel Crank Shaft Internally Balanced
  • K1, or Manley H-Beam Rods with ARP2000 Bolts
  • King “HP” Race Series Main and Rod Bearings
  • JE Wiseco 10.75:1 Pro Series Forged Racing Pistons and 180 Wall Pins
  • Total Seal Plasma Moly File to Fit.043/.043/3.0 mm Rings
  • Comp Cams or Erson 7/4 Swap .800″ Pro Street Solid Roller Cam
  • Comp Cams HIPPO Solid Roller Lifters
  • Cloyes True Roller Billet Timing Set
  • GM Chrome or Black Timing Cover Kit
  • Billet Aluminum TDC Pointer TDC Verified and Set to Damper
  • ATI SFI Super Damper Specific Honed to Fit Crank Hub
  • AFR 385, Dart Pro 2 380 or Brodix 365 O Fully CNC Ported Aluminum Heads
  • 2.350 x 1.85″ 11/32 Stainless Steel Valves
  • NexTek 1.64″ or Pac Solid Roller Springs and 10° Tool Steel Retainers
  • Fel Pro 1057 Head Gaskets
  • Manley 3/8 x .135″ Wall Heavy Duty Push Rod Set
  • Comp Cams Pro Magnum Roller Rocker Arms and AFR Stud Girdle
  • AwesomeEngines® CNC Engraved Powder Coated Pro Series Valve Covers
  • Moroso #22185 HV Oil Pump Kit, with Moroso Pick Up Tube Tig Welded
  • Moroso 8qt. Hi-Performance Kick Out Oil Pan; (marine upgrade available)
  • Brodix or ProFiler Sniper Intake Manifold CNC Match Ported to Heads
  • Jomar CNC Ported 4 Hole Heat Sync Spacer
  • 1250cfm QFT or Holley Ultra Pro Street Carburetor (marine available)
  • MSD Billet Dist, 8.5mm UTH Wires and NGK Plugs (dyno tuned)
  • Free 48 State Freight

Upgrade or Option not Listed is Available (call)

Dart or Brodix Aluminum Light Weight Block Fully CNC Race Prepped to Specifications and Special Head Stud Kit
+ $3995.00
Callies Magnum 4340 USA Steel Crank Shaft Internally Balanced with Heavy Metal Included
+ $1495.00
Callies H Beam Ultra Series Steel Rods with ARP L19 Bolts
+ $ 599.00
Callies Ultra I Beam with ARP L19 Bolts (add $1195.00) or Oliver Steel I Beam Rod with ARP L19 Bolts
+ $ 995.00
Brodix Head Hunter 395MC Fully CNC Ported Heads, CNC Match Ported Intake, Jesel or T&D Shaft Rockers, Triple Spring, Econel Exhaust 925+Hp
+ $1795.00
Titanium Intake Valves with Copper Beryllium Seats
+ $ 895.00
Enconel Exhaust Valves
+ $ 395.00
Titanium Exhaust Valves with Copper Beryllium Seats
+ $ 895.00
RED-ZONE Solid Needle Roller Lifters
+ $ 695.00
Isky EZ-ROLL MAX Solid Bushing Roller Lifters (best lifters period)
+ $ 995.00
Jesel or T&D Pro Series 1 Piece Intake Bar Shaft Rocker System Installed
+ $1395.00
Trend Taperwall 7/16 Push Rods Installed for Maximum Valve Train Stability (must have shaft rockers)
+ $ 395.00
Total Seal TNT or Hell Fire Rings
+ $ 150.00
MSD Crank Trigger System Installed
+ $ 295.00
Complete 50-513 (1250hp) Sniper Complete with 160 Pump Fuel Injection System Installed, Dyno Tested and Tuned (Silver or Gold Color is Available)
+ $1295.00
Complete EZ EFI Fast 30226-06 Kit Fuel Injection System Installed, Dyno Tested and Tuned for EZ EFI Set Up
+ $1475.00
Power Master 4.0 HP New Starter, SFI 168 Tooth Internally Balanced in House Flex-Plate and ARP Bolt Kit
+ $ 225.00
10″ XHD Pro Street Dual Anti Balloning Plates Custom Converter Matched per your dyno results needs and good for 850HP
+ $ 695.00
HD TH400 Transmission and Matched Pro Street 10″ Torque Converter for your Engine and Cars Performance Needs
+ $1875.00

Dyno Tested and Tuned with Exxon 91° Pump Gas • Vacuum Pump • HP Corrected to Sea Level


Comments are closed.