598CI 1650HP BBC Nitrous Race Engine

598ci 1650HP BBC Nitrous Race Engine

$22,575.00

10.2 Deck | 4.6″ Bore | 4.5″ Stroke | 6.535 Rods |1650HP @ 7100 rpm 550Hp Tune

Actual Dyno of 2 stage 632

Components

  • World IV Steel Billet Splayed 4 Bolt Main Cap 4 Axis CNC Race Prepped Block
  • Specific Fit Head and Inner Valley Stud Kit Plate Honed with the Block
  • Oring Block with .041″ Stainless Steel Wire on Perfect 4.840 Bore Centers
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • Callies USA 4340 Magnum or Crower Enduro Internally Balanced Crank
  • Callies Ultra or Oliver USA Steel I Beam Severe Duty Nitrous Rods
  • Clevite or King “HP” Race Series Main and Rod Bearings
  • JE or Wiseco Gas Ported Coated Skirt Nitrous Pistons
  • Tool Steel .220″ Thick Wall N2O Wrist Pins
  • Total Seal 043/043/3mm Stainless Steel, TNT or Hell Fire Nitrous Rings
  • Comp Cams .850″ 7/4 Swap Steel Billet Nitrous Cam
  • Cloyes Billet True Roller Timing Set and Torrington Bearing
  • Solid Polished Aluminum Timing Cover and Billet TDC Pointer
  • Isky Red Zone EZ-Roll Max Solid Bushing Roller Lifters
  • ATI Super Dampener Specific Hone to Crank Shaft
  • Brodix 385MC Fully CNC Ported Heads
  • Brodix or Manley 2.400 x 1.850″ Severe Duty Valves
  • Pacaloy Triple Springs and 10° Titanium Retainers
  • SCE Copper Head Gaskets with Receiver Grooved Heads
  • Manley 7/16 x .165″ Wall Severe Duty Push Rods
  • Jesel or T&D Pro Series Shaft Rocker System Installed
  • AwesomeEngines® CNC Logo Powder Coated Valve Covers
  • Moroso 22163 Billet Aluminum Oil Pump
  • Moroso 21049 Steel Kick Out Eliminator Pan
  • Brodix CNC Match Ported Intake Manifold
  • Jomar CNC Ported Heat Resistant Spacer and Stud Kit
  • Nitrous Express RNC Plate System 250 to 750+Hp
  • Holley Ultra or QFT N2O Special 1250CFM FX Series Carb
  • MSD 84697 Distributor, Crank Trigger, Wires, NGK Plugs
  • AwesomeEngines® T Shirt and (Free 48 State Continental Freight)

Available Upgrades

.904″ Roller Lifter
+ $ 475.00
Dart 9.8″ Short Deck Race Series Steel Billet Splayed Cap Raised Cam Wide Oil Pan Block with the 54mm Cam Bearing Fully CNC Race Prepped
+ $  975.00
Brodix or Dart 9.8″ Short Deck Aluminum Block Fully CNC Blue-Print Race Prepped with Special Stud Kit
+ $4275.00
Callies XL Series Internally Balanced Crank Light Weight (with heavy metal included in balance job)
+ $ 775.00
GRP Billet Aluminum Pro Mod Rods Installed and Block Radial Cleared for Rods
+ $ 375.00
Precision .250″ Thick Wall Wrist Pins (used for 2 stages or over 1600+hp, may require more heavy metal)
+ $ 175.00
Jesel Belt Drive with Roller Bearing Behind Top Gear Installed (raised cam block $1095.00)
+ $875.00
Manley Titanium Intake Valves Installed
+ $ 875.00
T&D Pro Series 1 Piece Shaft Rocker System with Spring Oilers and Roller Tip Option
+ $ 375.00
Moroso 22167 Billet Gerotor Oil Pump Installed
+ $ 175.00
20385 Moroso Pro Eliminator Aluminum Oil Pan
+ $ 275.00
Moroso Complete External Oil Pump with Special 20385 Aluminum Revised Oil Pan and Special Pickup Installed
+ $ 775.00
Moroso Complete 5 Stage Dry Sump System Installed
+ $2975.00
Moroso Accumulator System Installed
+ $ 275.00
Moroso 3 Vane Vacuum Pump System and Pump Mounted Relief Valve, Mandrel, Lines, Billet Tank and All Hardware
+ $1075.00
NX 200-500Hp 2nd Stage Shark Nozzle System Installed with L-250 Low Amp Solenoids (2000+Hp)
+ $1775.00
Ultra SFI Flex-plate House Internally Balanced, ARP Flex-plate Bolt Kit
+ $ 125.00
New Max-2000 Series 2000Hp Power Glide with Roller Bearing Extension and All Top Shelf Internals 60 Day Warranty
+ $3875.00
New Pro Max-3000 Series 3000Hp Power Glide with Pro Mod Pump, NASA Ringless Shaft and 10 Clutch Direct Drum 1 year Warranty
+ $4275.00
10″ Custom N2O Torque Converter with Steel Stator Custom Pump and Turbine Built for 2000HP
+ $1475.00
Power Master XL Series Race Starter
+ $ 275.00

Dyno Tested and Tuned with Vacuum Pump • HP Corrected to Sea Level

Comments are closed.

what is a cheap car insurance