598ci 960 Hp BBC SD Pro Bracket Race Engine

598ci 960 Hp BBC SD Pro Bracket Race Engine

$14,995.00

9.800″ Deck | 4.600″ Bore | 4.500″ Stroke | 6.535″ Rods | 960Hp @ 7000 rpm

Components

  • Dart BIG M or World IV Splayed Cap 100% CNC Race Prepped Block
  • Dart or Durabond Coated Cam Bearings, Brass Freeze Plug Kit
  • ARP Head and DART Inner Valley Stud Kit Plate Honed with Block
  • K1 or Manley 4340 4½” Internally Balanced Steel Crank
  • K1 Steel Billet or Manley H BEAM 4340 Rods with ARP 2000 Bolts
  • KING Race Series Main and Rod Bearings
  • JE or Wiseco Quick 16 Gas Ported 14.5:1 Pistons
  • JE or Wiseco .180″ Wall Tool Steel Wrist Pins
  • Total Seal .043 SS, TNT or Hell Fire File to Fit Ring Set
  • Competition Cams .800 Lift 7/4 Swap Solid Roller Camshaft
  • Competition Cams HIPPO Solid Roller Lifters
  • Cloyes Billet Double Roller with Torrington Bearing
  • GM Chrome Timing Cover and Billet TDC Pointer
  • ATI Super Damper Specific Honed to Fit Internally Balanced

  • Brodix BB-3 XTRA 363cc CNC Cylinder Heads .800″ 433/295
  • PAC RACING .850″ Lift Springs and Titanium 10° Retainers
  • FEL PRO 1077 MLS High Performance Head Gaskets
  • Manley 3/8 x .135″ Wall Severe Duty Push Rods
  • Harland Sharp 1.7 Rockers
  • Jomar Light Weight Stud Girdle
  • AwesomeEngines® CNC Logo Aluminum Valve Covers
  • Moroso 22175 Complete Oil Pump Kit
  • Moroso 20406 Stroker 7qt Total Drag Race Oil Pan
  • Brodix 100% CNC Match Ported 4500 Intake
  • Jomar CNC Ported 1¼” Spacer
  • Holley or QFT 1250 CFM Carburetor
  • MSD 846973 Dist, 8.5mm Wires and NGK Plugs
  • AwesomeEngines® Free 48 State Freight

OPTIONS

AFR 2021 385cc 2.350/1.880″ Valves Fully CNC Ported Cylinder Heads Flow 452/344@ .800″ and T&D Shaft Rockers Installed
+ $ 2975.00
DART 440cc 20° CNC-CC, 452/321@ .800″ Triple Spring Heads, Jesel Shaft Rockers, .850″ Lift Camshaft, Bushed Lifters, 7/16 Push Rods & Hell Fire Rings
+ $3975.00
COMP CAMS BUSHED HIPPO Solid Roller Lifters
+ $ 475.00
Jesel or T&D Pro Series Split Ratio 1.8/1.7 Shaft Rockers
+ $1375.00
Jesel Belt Drive System
+ $ 875.00
Moroso Vacuum Pump System Installed and Dyno Tested with Engine
+ $ 975.00
Moroso #21047 Eliminator Steel Side Kick Out Oil Pan
+ $ 175.00
Holley or QFT 1250 CFM Carburetor, Jomar 1¼” CNC Ported Heat Sink Spacer, Studs, Gaskets, #6 Fittings
+ $1275.00
MSD Crank Trigger System Dyno Tested and Tuned with Engine
+ $ 275.00
AwesomeEngines® Sheet Metal CNC Engraved Power Coated Black Valve Covers
+ $ 350.00

Dyno Tested & Tuned with 112 Fuel • Crank Trigger • Vacuum Pump • 21047 Pan • HP Corrected To Sea Level

Free Freight Applies to this Engine Shipped to a Commercial Address or Terminal Closest to your Zip Code for Pickup in the 48 States

Comments are closed.