601ci 1105HP BBC Bullet Race Engine

601ci 1105Hp BBC Bullet Race Engine


9.850″ Deck | 4.610″ Bore | 4.5″ Stroke | 6.535″ Rods | 860 lbs @ 5800 rpm 1105 Hp @ 7200 rpm

Components in Red are all Included in the Price of the Engine!

  • World Merlin IV Splayed Cap 4 Axis CNC Race Prepped Block
  • ARP 12 Point Head and Inner Valley Stud Kit Plate Honed with Block
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • Dart or Manley 4340 Center Counter Weight Internally Balanced Crank
  • Manley Steel H-Beam Rods with ARP 2000 Bolts
  • Clevite or King “H” Race Series Main and Rod Bearings
  • Wiseco 15:1 Quick 16 Pro Series Gas Ported Coated Skirt Pistons
  • JE/Wiseco .180″ Thick Wall Steel Pins
  • Total Seal TNT or Hell Fire Low Tension Ring Set
  • Comp Cams .875″ 7/4 Swap Steel Billet Roller Camshaft
  • Comp Cams HIPPO Severe Duty Solid Roller Lifters
  • Cloyes Billet True Roller Timing Set with Torrington Bearing
  • Solid Polished Aluminum Front Timing Cover
  • ATI Super Damper Specific Honed to Fit and Billet TDC Pointer
  • Brodix 383MC Oval Port Fully CNC Ported Heads
  • Brodix 2.400 x 1.850″ Stainless Steel Valves
  • Manley or PAC 1.670 Triple Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Multi-Layered Head Gaskets
  • Trend Taper-Wall 7/16 x .165″” Wall Severe Duty Push Rods
  • Jesel or T&D Pro Series 1 Piece Intake Bar Shaft Rocker System
  • AwesomeEngines® CNC Engraved Powder Coated Logo Valve Covers
  • Moroso #22185 Oil Pump Kit with Tig Welded Proper Pick Up
  • Moroso Pro Eliminator #21049 Kick Out Oil Pan
  • Brodix BM2017-O CNC Match Ported 4500 Intake Manifold
  • Special Jomar Heat Sink CNC Ported Spacer
  • QFT FX 1350 cfm Race Series Carburetor
  • MSD 84697 Big Cap Distributor, Wires and NGK Plugs
  • Ultra Series SFI Internally Balanced Flex Plate and ARP Bolt Kit

Available Upgrades

Dart Big M or World Merlin IV Steel Billet Splayed Cap Racing Block
+$ 495.00
Dart Big M Pro 54mm Raised Cam, 904″ Lifters, Steel Billet Cap, Wide Oil Pan Racing Block +18hp
+ $ 995.00
Brodix or Dart Aluminum Block and ARP Special Head Stud Kit
+ 3995.00
Callies Magnum or Crower Enduro 4340 USA Center Counter Weight Internally Balanced Crank and Heavy Metal Included in the Price
+ $1295.00
Callies XL Light Weight 4340 USA Center Counter Weight Internally Balanced Crank and Heavy Metal Included in the Price
+ $1695.00
Oliver Steel I Beam Max Series Rods and L19 Bolts
+ $ 995.00
Callies Ultra Series I Beam Rods and L19 Bolts
+ $1195.00
Comp Cams New Needless Bushed Roller Lifters (these are the new era of roller lifters)
+ $ 495.00
Isky EZ MAX 37296LO180 Bushed Roller Lifters (best in the business)
+ $ 995.00
Jesel Belt Drive Installed (standard cam height block only)
+ $ 995.00
Titanium 2.400″ Intake Valves
+ $ 795.00
T&D Shaft Rocker Roller Tip and Spring Oil Option Installed
+ $ 325.00
Moroso #22163 Billet Gerotor Oil Pump
+ $ 125.00
MSD Crank Trigger System Installed and Dyno Tested
+ $ 275.00
Power Master 4.0Hp Ultra High Torque Made in the USA Mini Starter and Bolt Kit
+ $ 225.00
Moroso Vacuum Pump, Pump Mounted Relief Valve, 3 Bolt Mandrel, Hoses, AN Fittings, Brackets, Pulley’s for a Complete Kit
+ $1075.00
Ron’s Terminator Injection System Installed for a Turn Key Dyno Tested Engine
+ $1995.00

Dyno Tested and Tuned with 112 Fuel • Vacuum Pump • Corrected to Sea Level

Free freight of $500 applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges that exceed $500 will be known to you before we ship.

Comments are closed.