632ci 1075 Hp 7200 rpm BBC Bullet Race Engine

632ci 1075 Hp 7200 rpm BBC Bullet Race Engine

 $15,999.00

Complete Turn Key Racing Engine to Drop in and go

Components

  • World IV Splayed 4 Bolt Main Cap 4 Axis CNC Race Prepped Block
  • Fully Dead On CNC Race Prepped to Perfection Specifications
  • Brass or Stainless Steel Freeze Plugs Installed
  • ARP Pro Series Head and Intake Valley Stud Kit Plate Honed with Block
  • 4340 Internally Balanced 4.750″ Center Counter Weight Crank
  • 4340 H Beam 6.700″ Steel Rods with ARP2000 Bolts
  • King HP Race Series Main and Rod Brgs with Dura-Bond Cam Brgs
  • JE Forged 40cc 15:1 High Compression Racing Pistons
  • Plasma Moly File to Fit 1/16-1/16-3/16 Low Ten. Racing Ring Set
  • Erson .800″ Lift Steel Billet 7/4 Swap Solid Roller Cam
  • Steel Billet True Roller Adjustable Timing Chain Kit and Torrington Brg
  • Solid Polished Aluminum Timing Cover and Billet TDC Pointer
  • Erson Ultra Series HIPPO Solid Roller Lifters
  • PowerBond SFI Approved Internally Balanced Damper and Billet Pointer
  • Pro Filer Sniper X 375cc Fully CNC Ported Aluminum Heads
  • Erson Competition Series 2.350 Intake and 1.850 Exhaust Valves
  • Erson FSP Roller Springs, 10° Titanium Retainers and 10° Locks
  • Cometic Intake and MLS Head Gaskets and Fel Pro Gasket Set
  • Erson 3/8″ Intake and Exhaust Push Rod Set
  • T&D Pro Series Shaft Rocker System Installed
  • AwesomeEngines® CNC Engraved Fabricated Sheet Metal V Covers
  • Melling 10770 Select Oil Pump, Stud, Shaft Complete Kit
  • Milodon Oil Pan and Oil Pump Pick Up with ARP Oil Pan Bolt Kit
  • Pro Filer Sniper 4500 CNC Match Ported Intake with ARP Intake Bolts
  • Jomar Special 4500 CNC Ported Spacer
  • QFT FX or Holley Dominator 1350 Carb, #6 Fittings and Stud Kit
  • MSD Billet Dist, Crank Trigger, 8.5mm Wires NGK Plugs
  • Completely Dyno Tested and Tuned Racing Engine

Available Upgrades

World Steel Billet Splayed Cap Racing block Fully CNC Race Prepped to Perfection
+ $ 595.00
World Steel Billet Splayed Cam Racing Block with 55MM Cam Bearings, .904″ Lifters and .850″ 55mm 7/4 Steel Billet Camshaft Included
+ $1595.00
Callies Dragon Slayer 4340 USA Center Counter Weight Crank Shaft Internally Balanced with 4 pieces of Mallory
+ $1295.00
Crower Enduro 4340 or Callies Magnum USA Center Counter Weight Crank Shaft Internally Balanced with 4 pieces of Mallory
+ $1895.00
Oliver Steel I Beam Rods
+ $  995.00
Isky Max Series Red Zone Best in the Business Severe Duty Roller Lifters with Solid Bushing Roller Wheels
+ $  895.00
Erson or Manley 3/8 x .135″ Heavy Duty Push Rods
+ $   95.00
Erson or Manley 7/16 x .165″ Wall Severe Duty Push Rods
+ $ 295.00
Jesel Belt Drive Installed
+ $  895.00
Moroso Billet #22163 Oil Pump Installed
+ $  275.00
Moroso #20385 Aluminum Kick Out Power Making Partitioned and Louvered Windage Tray Cap Divider Drag Race Oil Pan
+ $  495.00
SFI 168 Tooth Flex-Plate Internally Balanced in House with ARP Bolt kit
+ $  125.00
Power Master High Torque Made in the USA Mini Starter and Bolt Kit
+ $  245.00
Moroso 3 Vane Complete Vacuum Pump System Installed and Dyno Tuned with Engine
+ $  995.00
ATI Super Dampener Specific Honed to Fit the Crank Snout Used
+ $  295.00

Dyno Tested and Tuned with C12 Race Fuel • Vacuum Pump • HP Corrected to Sea Level

Free freight applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges if any will be known to you before we ship.

Comments are closed.