632ci 1200HP Big Chief Race Engine

632ci 1200Hp Big Chief Race Engine

$25,499.00

10.2″ Deck | 4.6″ Bore | 4.75″ Stroke | 6.7″ Rods | 975lbs @ 6000 1200 Hp @ 7400 rpm

see actual dyno pull w/sheet metal 2×4

Components

  • Merlin III ARP Studded Splayed Cap Fully Race Prepped Block
  • Brass or Stainless Steel Freeze Plug Kit Installed
  • Brodix Specific Head and Intake Valley Stud Kit
  • Callies Magnum 4340 Internally Balanced Crank
  • Callies 4340 H Beam Steel Rods with L19 Rod Bolts
  • King “HP” Race Series Main and Rod Bearings
  • Wiseco 15:1 Quick 8 K493B100 Gas Ported Coated Skirt Pistons
  • .180″ Wall Heavy Duty Steel Wrist Pins
  • Total Seal Stainless Steel N2O 043bc-043d-3mm Ring Package
  • Comp Cams .900″ Billet 7/4 Swap Roller Camshaft
  • Comp Cams .904″ HIPPO Roller Lifters
  • Cloyes Torrington Bearing 9-3710 Quick Adjust Timing Set
  • Aluminum Timing Cover, ATI Damper and Billet TDC Pointer
  • Brodix® Man Eater PB 1203 Heads
  • Titanium 2.520 Intake and 1.860 Stainless Steel Exhaust Valves
  • Pac or Manley Nex Tek Triple Springs and Tool Steel Retainers
  • Fel-Pro MLS Nitrous Head Gaskets
  • Trend Taper Wall ½” Severe Duty .200″ Wall Push Rods
  • T&D 1 Piece Pro Series Shaft Rocker System
  • AwesomeEngines® Brodix® Logo Valve Covers
  • Moroso 22185 Oil Pump Kit with Tig Welded Pick Up
  • Moroso 21048 Pro Eliminator Oil Pan
  • Brodix PM1817 Match Ported Intake and Jomar Special Spacer
  • QFT 1300 cfm FX Series Carburetor and #6 Fuel Fittings, Studs, Gaskets
  • MSD Distributor, Crank Trigger, NGK Plugs and 8.5mm Wires
  • Free 48 State Freight

Available Upgrades

Dart or Merlin III Block w/55mm Cam Bearings and 55mm Camshaft Upgrade
+ $ 695.00
Dart or Merlin III Steel Billet Splayed Cap Block w/55mm Cam Bearings and Camshaft Upgrade w/Bronze Lifter Bore Bushings Installed
+ $1495.00
Brodix or Dart Aluminum Block Fully Race Prepped
+ $3995.00
Callies Magnum XL Series Internally Balanced Crank with Heavy Metal Included
+ $1295.00
Callies Ultra or Oliver Steel I Beam Rods
+ $ 895.00
Trend or Precision .200″ Tool Steel Wrist Pins (may require more heavy metal )
+ $ 195.00
Comp Cams or Jesel Belt Drive Installed
+ $ 995.00
Enconel Exhaust Valves
+ $ 395.00
T&D Shaft Rocker System and Upgrade Roller Tip Bearing
+ $ 395.00
Moroso #22163 Billet Aluminum Oil Pump
+ $ 275.00
Moroso #22167 Gerotor Billet Aluminum Oil Pump
+ $ 350.00
Moroso Aluminum #20385 Pro Eliminator Kick Out Style Oil Pan
+ $ 395.00
Moroso Complete Vacuum Pump System Completely Installed
+ $ 995.00
Ultra SFI 168 Tooth Flex-plate Internally Balanced in House w/ARP Bolts
+ $ 125.00
Power Master High Torque Gear Reduction Made in the USA New Design Starter
+ $ 225.00
Nitrous Express Plate System from 100-500Hp Installed
+ $1095.00
NX 200-600 Hp Shark System with new Low Amp L-250 Solenoids Installed
+ $1695.00
New “BIG DAWG DADDY” 10″ Steel Stator Natural or NOS Style Converter
+ $1495.00
New PRO DADDY 2000Hp Power Glide and Roller Bearing Extension and Pro Lite Trans-Brake
+ $3995.00

Dyno T&T with 116 Fuel • 20385 Moroso Pan • Vacuum Pump • Crank Trigger • Corrected to Sea Level

Comments are closed.