632ci 1290HP Big Chief Race Engine

632ci 1290Hp Big Chief Race Engine

$34,999.00

10.2″ Deck | 4.6″ Bore | 4.75″ Stroke | 6.7″ Rods | 1020lbs @ 6200 rpm 1290Hp @ 7600 rpm

 see actual dyno pull for 655ci

Components

  • Dart 54mm Raised Cam Steel Billet Splayed Cap Race Block
  • ARP Head and Inner Valley Stud Kit Plate Honed with Block
  • Blue-Printed Bores with .041″ Stainless Steel O ring Installed
  • Callies Magnum BBS42B-MG Internally Balanced Crank
  • Callies Ultra or Oliver I Beam Steel Rods
  • King “HP” Race Series Main and Rod Bearings
  • Wiseco 15:1 Quick 8 Gas Ported Coated Skirt Pistons
  • Wiseco .200″ Tool Steel Thick Wall Wrist Pins
  • Total Seal TNT or Stainless Steel N2O 043bc-043d-3mm Rings
  • Comp Cams 54mm .925″ 7/4 Swap Billet Roller Cam
  • Jesel Raised Cam Belt Drive Installed
  • Isky Red Zone EZX .904″ Bushed Roller Lifters
  • ATI Super Damper Specific Honed to Crank
  • Billet TDC Verified TDC Pointer
  • Dart 11° Pro Stock Fully CNC Ported Cylinder Heads
  • Titanium 2.470 Intake and 1.860 Enconel Exh Valves
  • Manley Nex Tek or Pack Triple Springs and Tool Steel Retainers
  • Copper Head Gaskets with O Ringed Block and Receiver Grooved Heads
  • Trend Taper Wall  ½” .200″ Wall Extreme Duty Push Rods
  • T&D 3070 Shaft Rocker System with Spring Oilers Roller Tip Option
  • AwesomeEngines® Sheet Metal Logo Valve Covers
  • AwesomeEngines® Moroso 22167 Billet Gerotor Oil Pump
  • AwesomeEngines® Moroso Aluminum Pro Eliminator Oil Pan
  • CFE Sheet Metal Aluminum 2×4 Intake
  • 2×4 QFT 1400 cfm FX Series Carbs and Jomar Spacers
  • MSD Distributor, Crank Trigger, Wires, NGK Spark Plugs Ignition System
  • Moroso 4 Vane Pro Series Vacuum Pump System
  • Free 48 State Freight

Available Upgrades

Brodix Aluminum Block Fully Race Prepped
+ $3495.00
Callies XL Series Internally Balanced Crank with Heavy Metal Installed and Included
+ $1295.00
Trend or Precision .300 x .250 Taper-wall Tool Steel Wrist Pins (will require additional heavy metal)
+ $ 195.00
Moroso 4 Stage Dry Sump System Installed Completely
+ $2995.00
Ultra SFI 168 Tooth Flex-plate Internally Balanced in House with ARP Bolts
+ $ 125.00
Power Master 4.0 Hp High Torque Gear Reduction Made in the USA New Design Starter
+ $ 225.00
Nitrous Express 2×4 Plate System from 100-500Hp Installed
+ $1295.00
NX Shark 200-600Hp System with new Low Amp L-250 Solenoids Installed
+ $1695.00
New “BIG DAWG DADDY” 11″ Steel Stator Natural or NOS Style Converter
+ $1695.00
New PRO DADDY 2000Hp Power Glide with Roller Bearing Extension and All the Goodies
+ $3995.00

Dyno Tested and Tuned with 116 Race Fuel • Corrected to Sea Level

Comments are closed.