632ci 900 HP BBC Pro Street Crate Engine

632ci 900Hp Pro Street Crate Engine


Pro Street Crate Engines are completed dyno tested ready units Best in the business and professionally machined on a Centroid 4 axis CNC block machining center for dead on tolerances. Then professionally assembled and dyno tested and tuned for maximum HP

(see 632ci 910hp actual dyno pull)

10.2″ Deck | 4.6″ Bore | 4.75″ Stroke | 6.7″ Rods | 900Hp @ 7000 rpm


  • World IV Splayed 4 Bolt Main Cap 4 Axis CNC Race Prepped Block
  • Brass or Stainless Steel Life Time Freeze Plugs Installed
  • Inner Valley and 12 Point Hp Head Stud Kit Plate Honed with Block
  • Dart or Manley 4340 Forged Steel Crank Shaft Internally Balanced
  • K1 or Manley H-Beam Rods with ARP2000 Bolts
  • King “HP” Race Series Main and Rod Bearings
  • JE or Wiseco 10.95:1 Pro Series Forged Racing Pistons and 180 Wall Pins
  • Total Seal Plasma Moly File to Fit.043/.043/3.0 mm Ring Set
  • Comp Cams or Erson 7/4 Swap .800″ Pro Street Solid Roller Cam
  • Comp Cams HIPPO Solid Roller Lifters
  • Cloyes True Roller Billet Timing Set
  • GM Chrome or Black Timing Cover Kit
  • Billet Aluminum TDC Pointer TDC Verified and Set to Damper
  • ATI SFI Super Dampener Specific Honed to Fit Crank Hub
  • AFR 385, Dart Pro 2 380 or Brodix 365 O Fully CNC Ported Aluminum Heads
  • 2.35 x 1.85 x 11/32″ Stainless Steel Valves
  • Nex Tek 1.640″ or Pac Racing Solid Roller Springs and 10° Tool Steel Ret.
  • Fel Pro 1077-1 MLS Severe Duty Racing Head Gaskets
  • Manley 3/8 x .135″ Wall Heavy Duty Push Rod Set
  • Comp Cams Pro Magnum Roller Rocker Arms and AFR or  Jomar Stud Girdle
  • AwesomeEngines® CNC Engraved Powder Coated Pro Series Valve Covers
  • Moroso #22185 HV Oil Pump Kit, with Moroso Pick Up Tube Tig Welded
  • Moroso 21049 Hi-Performance Kick Out Oil Pan, others are available
  • ProFiler Sniper Intake Manifold CNC Match Ported to Heads
  • Jomar CNC Ported 4 Hole Heat Sync Spacer
  • 1250 cfm QFT FX or Holley Ultra Series 4500 Carburetor
  • MSD Billet Dist, Wires and NGK Plugs
  • Free 48 State Freight

Upgrade or Option not Listed is Available (call)

Dart or Brodix Aluminum Light Weight Block Fully CNC Race Prepped to Specifications and Special Head Stud Kit
+ $3995.00
Callies Magnum Forged 4340 USA Steel Crank Shaft Internally Balanced (not making the dragon slayer any longer)
+ $1495.00
Callies H Beam Ultra Series Steel Rods with ARP L19 Bolts
+ $  599.00
Callies Ultra I Beam with ARP L19 Bolts (add $1195.00) or Oliver Steel I Beam Rod with ARP L19 Bolts
+ $  995.00
Brodix Head Hunter 395MC Fully CNC Ported Heads, CNC Match Ported Intake, Jesel or T&D Shaft Rockers, Triple Spring, Econel Exhaust 925+Hp
+ $1795.00
Titanium Intake Valves with Copper Beryllium Seats
+ $ 895.00
Enconel Exhaust Valves
+ $ 395.00
Titanium Exhaust Valves with Copper Beryllium Seats
+ $ 895.00
RED-ZONE Solid Needle Roller Lifters
+ $ 695.00
Isky EZ-ROLL MAX Solid Bushing Roller Lifters (best lifters period)
+ $ 995.00
Jesel or T&D Pro Series 1 Piece Intake Bar Shaft Rocker System Installed
+ $1395.00
Trend Taperwall 7/16 Push Rods Installed for Maximum Valve Train Stability (must have shaft rockers)
+ $ 395.00
Total Seal TNT or Hell Fire Rings
+ $ 150.00
MSD Crank Trigger System Installed
+ $ 295.00
Complete 50-513 (1250hp) Sniper Complete with 160 Pump Fuel Injection System Installed, Dyno Tested and Tuned (Silver or Gold Color is Available)
+ $1295.00
Complete EZ EFI Fast 30226-06 Kit Fuel Injection System Installed, Dyno Tested and Tuned for EZ EFI Set Up
+ $1475.00
Power Master 4.0 HP New Starter, SFI 168 Tooth Internally Balanced in House Flex-Plate and ARP Bolt Kit
+ $ 225.00
10″ XHD Pro Street Dual Anti Balloning Plates Custom Converter Matched per your dyno results needs and good for 850HP
+ $ 695.00
HD TH400 Transmission and Matched Pro Street 10″ Torque Converter for your Engine and Cars Performance Needs
+ $1875.00

Dyno Tested and Tuned with Exxon 93° Pump Gas • Vacuum Pump • HP Corrected to Sea Level

Comments are closed.