632CI 1225HP DR20° BBC Bullet Race Engine

632ci 1225Hp DR20° BBC Bullet Race Engine

$25,995.00

10.2″ Deck | 4.6″ Bore | 4.75″ Stroke | 6.7″ Rods | 935 lbs @ 6000  | 1225 Hp @ 7400 rpm

Components in Red are all Included in the Price of the Engine!

  • Dart Big M Pro Steel Splayed Main Cap 4 Axis CNC Race Prepped Block
  • ARP 12 Point Head and Inner Valley Stud Kit Plate Honed with Block
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • Dart or Manley 4340 Steel Center Counter Weigh Internally Balanced Crank
  • Oliver Max Series Steel I Beam Severe Duty Rods with L19 Bolts
  • Clevite or King “H” Race Series Main and Rod Bearings
  • JE/Wiseco DR20° 16:1 Quick 8 Pro Series Gas Ported Coated Skirt Pistons
  • JE/Wiseco .180″ Thick Wall Steel Wrist Pins
  • Total Seal TNT or Hell Fire Ring Set and Low Tension Oil Rings
  • Comp Cams .900″ 7/4 Swap 54mm Steel Billet Roller Camshaft
  • Isky EZX MAX Red Zone 37296LO180 Bushed .904″ Roller Lifters
  • Cloyes Billet True Roller Timing Set with Torrington Bearing
  • Solid Polished Aluminum Front Timing Cover
  • ATI Super Damper Specific Honed and Billet TDC Verified Pointer
  • Dart Pro 1 20° 451cc Fully CNC Ported Heads
  • Dart Titanium 2.400 x 1.800″ Enconel Steel Valves
  • Manley or PAC 1.670″ Triple Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Multi-Layered Head Gaskets
  • Trend Taper-Wall 7/6″ x .165″ Wall Severe Duty Push Rods
  • Jesel or T&D Pro Series 1 Piece Stand Shaft Rocker System
  • AwesomeEngines® DR20° Sheet Metal CNC Engraved Valve Covers
  • Moroso #22163  Billet Aluminum Oil Pump
  • Moroso Eliminator #21049 Kick Out Oil Pan
  • ProFiler Sniper CNC Match Ported Large Port Intake
  • Special Jomar Heat Sink CNC Ported Spacer
  • Holley QFT 1450 cfm FX Race Series Carburetor
  • MSD 84697 Big Cap Distributor and Crank Trigger Installed
  • Ultra Series SFI Internally Balanced Flex Plate and ARP Bolt Kit

Available Upgrades

Dart #31264655 Big M Pro Race Series Steel Billet Splayed Cap Aluminum Race Block and Special ARP Head Stud Kit Included
+ $3995.00
Brodix #8B2000C Aluminum Block with Raised 55mm Cam, ½ Filled Block with .904″ Lifter Bores
+ $4495.00
Callies Magnum Internally Balanced Crank (with heavy metal included in balancing)
+ $1295.00
Callies XL Light Weight Internally Balanced Crank (with heavy metal included in balancing)
+ $1695.00
Callies Ultra I-Beam 4330M Timken Steel Rods with L19 Bolts
+ $ 295.00
Jesel Belt Drive System Installed
+ $  995.00
Titanium Exhaust Valves
+ $  495.00
Moroso Complete Vacuum Pump System Completely Installed
+ $1095.00
Moroso #22167 Gerotor HV Billet Oil Pump
+ $  175.00
Moroso Aluminum #20385 Pro Eliminator Kick Out Style Oil Pan
+ $  295.00
ATI SFI 168 Tooth Made in the USA None Better Flex-plate Internally Balanced Checked In House
+ $  125.00
Power Master 4.0Hp High Torque Gear Reduction Made in the USA New Design Starter
+ $  195.00
Rons Terminator System Installed, Dyno Tested and Tuned Ready to Run
+ $1995.00

Dyno Tested and Tuned with 116 Fuel • Vacuum Pump • Corrected to Sea Level

Free freight of $500 applies to this item shipped to a commercial address in the normal 48 states. Handling fees, insurance, residential, lift gate service, out of area charges, will apply for your area where you have this item shipped to. Total cost of these charges that exceed $500 will be known to you before we ship.

Comments are closed.