632CI 1180HP DR20° BBC Bullet Race Engine

632ci 1180Hp DR20° BBC Bullet Race Engine

$24,495.00

10.2″ Deck | 4.6″ Bore | 4.75″ Stroke | 6.7″ Rods | 905 lbs @ 5800  | 1180 Hp @ 7400 rpm

Components

  • World IV Splayed 4 Bolt Main Cap 4 Axis CNC Race Prepped Block
  • ARP 12 Point Head and Inner Valley Stud Kit Plate Honed with Block
  • Stainless Steel Lifetime Freeze Plug Kit Installed
  • Dart or Manley 4340 Steel Center Counter Weighted Int/Balanced Crank
  • Oliver Max Series Steel I Beam Severe Duty Rods with L19 Bolts
  • King “H” Race Series Main and Rod Bearings
  • JE/Wiseco DR20° 16:1 Quick 8 Pro Series Gas Ported Coated Skirt Pistons
  • .180″ Thick Wall Tool Steel Wrist Pins
  • Total Seal Stainless Steel, TNT or Hell Fire with Low Tension Oil Rings
  • Comp Cams .900″ 7/4 Swap Steel Billet Roller Camshaft
  • Isky EZ MAX Red Zone 37296LO180 Bushed Roller Lifters (nothing better)
  • Cloyes Billet True Roller Timing Set with Torrington Bearing
  • Solid Polished Aluminum Front Timing Cover
  • ATI Super Damper with Billet TDC Verified Pointer
  • Dart Pro 1 20° 451cc Fully CNC Ported Heads
  • Dart 2.4 x 1.8″ Stainless Steel Valves
  • Manley or PAC 1.670″ Triple Springs and Titanium Retainers
  • Cometic or Fel Pro MLS Multi-Layered Head Gaskets
  • Trend Taper-Wall 7/6″ x .165″” Wall Severe Duty Push Rods
  • Jesel or T&D Pro Series 1 Piece Stand Shaft Rocker System
  • AwesomeEngines® DR20° Sheet Metal CNC Engraved Valve Covers
  • Moroso #22163  Billet Aluminum Oil Pump
  • Moroso Eliminator #21049 Kick Out Oil Pan
  • ProFiler Sniper CNC Match Ported Large Port Intake
  • Special Jomar Heat Sink CNC Ported Spacer
  • QFT 1450 cfm FX Race Series Carburetor
  • MSD 84697 Big Cap Distributor and Crank Trigger Installed
  • Free 48 State Freight Shipped to a Commercial Address w/Fork Lift

Available Upgrades

World IV Steel Billet Splayed Cap Race Block with 55MM Cam Tunnel, .904″ Lifter Bores; Cam and Lifter Upgrade Included (1200Hp)
+ $  995.00
Aluminum Lite Version with a Brodix or Dart Aluminum Block with Raised Cam 55mm and .904″ Lifter Bores; Cam and Lifter upgrade Included
+ $4995.00
Callies Magnum Internally Balanced Crank (with heavy metal included in balancing)
+ $1495.00
Callies Ultra I-Beam 4330M Timken Steel Rods with L19 Bolts
+ $ 495.00
Trend or Precision .220″ Tool Steel Severe Duty Wrist Pins; will require more heavy metal
+ $  195.00
Titanium Intake Valves
+ $  795.00
Moroso Complete Vacuum Pump System Completely Installed
+ $1095.00
Moroso #22167 Gerotor HV Billet Oil Pump
+ $  175.00
Moroso Aluminum #20385 Pro Eliminator Kick Out Style Oil Pan
+ $  295.00
Moroso Accumulator System Installed for Deceleration Oil Pressure Stability
+ $ 395.00
Ultra SFI 168 Tooth Flex-plate Internally Balanced in House w/ARP Bolts
+ $  125.00
Power Master 4.0Hp High Torque Gear Reduction Made in the USA New Design Starter
+ $  195.00
Rons Terminator System Installed, Dyno Tested and Tuned Ready to Run
+ $1995.00

Dyno Tested and Tuned Using 116 Fuel • Vacuum Pump • Corrected to Sea Level

Comments are closed.